Ip Pim Neighbor-Filter - Dell S4810 Reference Manual

Table of Contents

Dell(conf)# ip access-list standard map1

Dell(config-std-nacl)# permit 224.0.0.1/24

Dell(config-std-nacl)#exit

Dell(conf)#int gig 1/1

Dell(config-if-gi-1/1)# ip pim ingress-interface-map map1

ip pim neighbor-filter

To prevent a router from participating in protocol independent multicast (PIM), configure this feature.

ip pim neighbor-filter {access-list}

To remove the restriction, use the no ip pim neighbor-filter {access-

list} command.

CONFIGURATION

This guide is platform-specific. For command information about other platforms,

refer to the relevant Dell Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

Version 9.0.2.0

Version 8.3.11.1

Version 8.3.7.0

Version 8.1.1.0

Version 7.8.1.0

Version 7.6.1.0

Do not enter this command before creating the access-list.

Enter the name of a standard access list. Maximum 16

Introduced on the S6000.

Introduced on the S4820T.

Introduced on the Z9000.

Introduced on the S4810.

Introduced on the E-Series ExaScale.

Introduced on the C-Series and S-Series.

Introduced on the E-Series.

PIM-Sparse Mode (PIM-SM)

Show Quick Links

Table of Contents