Dell S4810 Reference Manual page 1487

Table of Contents

This guide is platform-specific. For command information about other platforms,

refer to the relevant Dell Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

Version 9.4.

If the TACACS group is not configured for Authentication, Authorization, and

Accounting, then globally configured TACACS servers are used for the purposes.

When the TACACS group is removed, the AAA configuration is also removed.

Dell(conf)#tacacs-server group group1

Dell(conf-tacacs-group)#tacacs-server host 1.1.1.1 key secret

Dell(conf-tacacs-group)#tacacs-server host 2.2.2.2 key secret

Dell(conf-tacacs-group)#tacacs-server vrf vrf1 source-

interface tengigabitethernet 0/36

Dell(conf)#exit

Dell(conf)#aaa tacacsgroup group1

aaa authentication login

tacacs-server key

debug tacacs+

To assist with troubleshooting, view TACACS+ transactions.

debug tacacs+

To disable debugging of TACACS+, use the no debug tacacs+ command.

EXEC Privilege

This guide is platform-specific. For command information about other platforms,

refer to the relevant Dell Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

Version 9.0.2.0

Version 8.3.11.1

Version 8.3.7.0

Version 7.6.1.0

Introduced on the S-Series and Z-Series.

— specifies the login authentication method.

— configures a TACACS+ key for the TACACS server.

Introduced on the S6000.

Introduced on the S4820T.

Introduced on the Z9000.

Introduced on the S4810.

Introduced on the S-Series.

Show Quick Links

Table of Contents