Logging History - Dell S4810 Reference Manual

Table of Contents

Version 7.5.1.0

E-Series legacy

logging history

Specify which messages are logged to the history table of the switch and the SNMP network

management station (if configured).

logging history level

To return to the default values, use the no logging history command.

warnings or 4

CONFIGURATION

This guide is platform-specific. For command information about other platforms,

refer to the relevant Dell Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

Version 9.0.2.0

Version 8.3.11.1

Version 8.3.7.0

Version 7.6.1.0

Version 7.5.1.0

E-Series legacy

When you configure the snmp-server trap-source command, the system

messages logged to the history table are also sent to the SNMP network

management station.

Introduced on the C-Series.

— enables logging to a Syslog server.

— enables logging.

Indicate a value from 0 to 7 or enter one of the following

equivalent words: emergencies, alerts, critical,

errors, warnings, notifications, informational, or

debugging. The default is 4 or warnings.

Introduced on the S6000.

Introduced on the S4820T.

Introduced on the Z9000.

Introduced on the S4810.

Introduced on the S-Series.

Introduced on the C-Series.

Simple Network Management Protocol (SNMP) and Syslog

Show Quick Links

Table of Contents