Dell S4810 Reference Manual page 1637
Hide thumbs
Also See for S4810:
- Reference manual (1759 pages) ,
- Installing manual (58 pages) ,
- Configuration manual (17 pages)
Table of Contents
Advertisement
Version 8.4.2.1
Version 8.3.7.0
Version 7.7.1.0
Version 7.5.1.0
pre-Version
6.2.1.1
Usage
Enable spanning tree group 0 prior to using this command.
Information
The following describes the show spanning-tree 0 command shown in the
example.
Field
"Bridge
Identifier..."
"Configured
hello..."
"We are..."
"Current root..."
"Topology flag..."
"Number of..."
"Timers"
"Times"
"Port 1..."
"Port path..."
"Designated
root..."
"Designated
port..."
Spanning Tree Protocol (STP)
Added support for the optional guard keyword on the C-
Series, S-Series, and E-Series TeraScale.
Introduced on the S4810.
Introduced on the S-Series.
Introduced on the C-Series.
Introduced on the E-Series.
Description
Lists the bridge priority and the MAC address for this STP
bridge.
Displays the settings for hello time, max age, and forward
delay.
States whether this bridge is the root bridge for the STG.
Lists the bridge priority and MAC address for the root bridge.
States whether the topology flag and the detected flag were
set.
Displays the number of topology changes, the time of the
last topology change, and on what interface the topology
change occurred.
Lists the values for the following bridge timers: hold time,
topology change, hello time, max age, and forward delay.
List the number of seconds since the last:
•
hello time
•
topology change
•
notification
•
aging
Displays the Interface type slot/port information and the
status of the interface (Disabled or Enabled).
Displays the path cost, priority, and identifier for the
interface.
Displays the priority and MAC address of the root bridge of
the STG that the interface belongs.
Displays the designated port ID.
1637
- Quick Links:
- Boot System
- Restore Factory-Defaults
Hide quick links:
Advertisement
Table of Contents
