Hold-Time - Dell S4810 Reference Manual

Table of Contents

hold-time

Specify a delay (in seconds) before a switch becomes the MASTER virtual router. By delaying the

initialization of the VRRP MASTER, the new switch can stabilize its routing tables.

hold-time seconds

To return to the default value, use the no hold-time command.

zero (0) seconds

This guide is platform-specific. For command information about other platforms,

refer to the relevant Dell Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

Version 9.0.2.0

Version 8.3.11.1

Version 8.3.7.0

Version 7.6.1.0

Version 7.5.1.0

If a switch is a MASTER and you change the hold timer, disable and re-enable VRRP

for the new hold timer value to take effect.

To preempt or become the MASTER router, permit a BACKUP router with a higher priority value.

To prohibit preemption, use the no preempt command.

Virtual Router Redundancy Protocol (VRRP)

Enter a number of seconds. The range is from 0 to 65535.

The default is zero (0) seconds.

Introduced on the S6000.

Introduced on the S4820T.

Introduced on the Z9000.

Introduced on the S4810.

Introduced on the S-Series.

Introduced on the C-Series.

Introduced on the E-Series.

— disables a VRRP group.

Show Quick Links

Table of Contents