Vrrp Delay Reload - Dell S4810 Reference Manual

Table of Contents

vrrp delay reload

Set the delay time for VRRP initialization after a system reboot.

vrrp delay reload seconds

This guide is platform-specific. For command information about other platforms,

refer to the relevant Dell Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

Version 9.0.2.0

Version 9.0.0.0

Version 8.3.8.0

This command applies to all the VRRP configured interfaces on a system. When

used with the vrrp delay minimum CLI, the later timer rules the VRRP enabling.

For example, if vrrp delay reload is 600 and the vrrp delay minimum is

Save the configuration and reload the system for the delay timers to take effect.

vrrp delay minimum

Enter the number of seconds for the delay. The range is from

0 to 900 (0 indicates no delay).

Introduced on the S6000.

Introduced on the Z9000.

Introduced on the S4820T.

Introduced on the S4810.

When the system reloads, VRRP waits 600 seconds (10 minutes) to bring up

VRRP on all interfaces that are up and configured for VRRP.

When an interface comes up, whether as part of a system reload or an interface

reload, the system waits 300 seconds (5 minutes) to bring up VRRP on that

— sets the delay time for VRRP initialization after a line card

Virtual Router Redundancy Protocol (VRRP)

Show Quick Links

Table of Contents