Vrrp-Ipv6-Group - Dell S4810 Reference Manual

Table of Contents

Line Beginning

Dell#show vrrp ipv6

------------------

GigabitEthernet 5/6, IPv6 VRID: 255, Version: 3, Net:

fe80::201:e8ff:fe7a:6bb9

VRF: 0 default-vrf

State: Master, Priority: 101, Master: fe80::201:e8ff:fe7a:6bb9

Hold Down: 0 centisec, Preempt: TRUE, AdvInt: 100 centisec

Accept Mode: FALSE, Master AdvInt: 100 centisec

Adv rcvd: 0, Bad pkts rcvd: 0, Adv sent: 64

Virtual MAC address:

Virtual IP address:

vrrp-ipv6-group

Assign an interface to a VRRP group.

vrrp-ipv6-group vrid

Not configured.

This guide is platform-specific. For command information about other platforms,

refer to the relevant Dell Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

Version 8.4.2.1

Version 8.4.1.0

Version 8.3.7.0

Version 8.3.2.0

Cost to be subtracted from the VRRP group priority if the

state of the tracked interface/object goes DOWN.

00:00:5e:00:02:ff

1::255 fe80::255

Enter the virtual-router ID number of the VRRP group. The

VRID range is from 1 to 255.

The range of valid VRID values on the E-Series when VRF

microcode is loaded in CAM changed from 1 to 15.

Introduced on the E-Series ExaScale, C-Series, and S-Series.

Introduced on the S4820T.

Introduced on the S4810.

Introduced on the E-Series TeraScale.

Virtual Router Redundancy Protocol (VRRP)

Show Quick Links

Table of Contents