Table of Contents
Advertisement
Parameters
ip-prefix
ge min-prefix-
length
le max-prefix-
length
Defaults
Not configured.
Command
PREFIX-LIST
Modes
Command
Version 8.3.16.1
History
Usage
Sequence numbers for this filter are automatically assigned starting at sequence
Information
number 5.
If you do not use the ge or le options, only packets with an exact match to the
prefix are filtered.
Related
permit
Commands
seq
ip prefix-list
Enter the PREFIX-LIST mode and configure a prefix list.
Syntax
ip prefix-list prefix-name
Parameters
prefix-name
Command
CONFIGURATION
Modes
Command
Version 8.3.16.1
History
Usage
Prefix lists redistribute OSPF and RIP routes meeting specific criteria.
Information
196
Specify an IP prefix in the network/length format. For
example, 35.0.0.0/ 8 means match the first 8 bits of address
35.0.0.0.
(OPTIONAL) Enter the keyword ge and then enter the
minimum prefix length, which is a number from zero (0) to
32.
(OPTIONAL) Enter the keyword le and then enter the
maximum prefix length, which is a number from zero (0) to
32.
Introduced on the MXL 10/40GbE Switch IO Module.
— configures a filter to pass packets.
— configures a drop or permit filter with a specified sequence number.
Enter a string up to 16 characters long as the name of the
prefix list, up to 140 characters long.
Introduced on the MXL 10/40GbE Switch IO Module.
Access Control Lists (ACL)
Advertisement
Table of Contents
