Table of Contents
Advertisement
Example (Error
Dell#debug ip packet access-group test
Messages)
%Error: port operator GT not supported in access-list debug
%Error: port operator LT not supported in access-list debug
%Error: port operator RANGE not supported in access-list debug
%Error: port operator NEQ not supported in access-list debug
Dell#00:10:45: %RPM0-P:CP
%IPMGR-3-DEBUG_IP_PACKET_ACL_AMBIGUOUS_EXP: Ambiguous rules not
supported in access-list debug, access-list debugging is
turned off
Dell#
ip address
Assign a primary and secondary IP address to the interface.
Syntax
ip address ip-address mask [secondary]
To delete an IP address from an interface, use the no ip address [ip-
address] command.
Parameters
ip-address
mask
secondary
Defaults
Not configured.
Command
INTERFACE
Modes
Command
Version 8.3.16.1
History
Usage
You must be in INTERFACE mode before you add an IP address to an interface.
Information
Assign an IP address to an interface prior to entering ROUTER OSPF mode.
ip directed-broadcast
Enables the interface to receive directed broadcast packets.
Syntax
ip directed-broadcast
To disable the interface from receiving directed broadcast packets, use the no ip
directed-broadcast command.
IPv4 Routing
Enter an IP address in dotted decimal format.
Enter the mask of the IP address in slash prefix format (for
example, /24).
(OPTIONAL) Enter the keyword secondary to designate the
IP address as the secondary address.
Introduced on the MXL 10/40GbE Switch IO Module.
623
Advertisement
Table of Contents
