Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Tascam CD-9010CF
Summary of Contents for Tascam CD-9010CF
- Page 1 D01164320A CD-9010CF CD/Solid State Player OWNER'S MANUAL...
-
Page 2: Important Safety Information
The cord tacles, and the point where they exit from the appa- of such a product must be plugged into an AC outlet ratus. that has a protective grounding connection. 11 Only use attachments/accessories specified by the manufacturer. TASCAM CD-9010CF... -
Page 3: Safety Precautions
(e) Return and collection systems are available to end users. For more detailed information about the disposal of old electrical and electronic equipment, please contact your city office, waste disposal service or the shop where you purchased the equipment. TASCAM CD-9010CF... - Page 4 YOUR NEAREST QUALIFIED SERVICE PERSONNEL, AND DO NOT USE THE PRODUCT IN ITS DAMAGED STATE. Optical pickup Type: HOF-1501XB Manufacturer: Hitachi Media Electronics Laser output: Less than 0.5 mW on the objective lens Wavelength: 785 nm ±22 nm Standard: IEC60825-1 : 2007 TASCAM CD-9010CF...
-
Page 5: Table Of Contents
Importing cue lists ............34 Setting the playback mode ........21 Exporting cue lists ............34 Playing a track once from the beginning ..22 Automatic cue point loading options .......34 Playing a track from the middle ......22 Automatic cue point memory (last cue) ....22 TASCAM CD-9010CF... - Page 6 Monitoring point setting..........45 Audio performance ............53 Muting monitoring when online .........45 Backup memory ..............54 Importing menu settings ..........45 General .................54 Exporting menu settings ..........45 Dimensional drawings ............54 Restoring the factory settings ........46 Viewing media information ..........46 Viewing system information .........46 TASCAM CD-9010CF...
-
Page 7: Introduction
Keep the packing materials for transportation in the future. Please keep this manual so that you can refer to it at any time. Please contact TASCAM if any of these items are missing or have A digital copy of this manual can also be downloaded from our been damaged during transportation. -
Page 8: Intellectual Property Rights
1 – Introduction Intellectual property rights Connecting the power • • AC IN connector TASCAM is a trademark of TEAC Corporation, registered in Insert the included power cord into the the U.S. and other countries. completely. • • CompactFlash is a registered trademark of SanDisk Hold the power cord by the plug when connecting or Corporation in the USA and other countries. -
Page 9: About Discs
Music discs with copy control, a copy-protection system, have been released form several record companies in an attempt to protect the copyright. Since some of these discs do not comply with the CD specifications, they may not be playable on the unit. TASCAM CD-9010CF... -
Page 10: Names And Functions Of Parts
To unlock it, push it in time. This button only changes the display on this unit. again. (See "Connecting headphones" on page 20.) To change the time display on a connected TASCAM RC-9010/RC-9010S remote control (sold separately), press CAUTION the TIME DISPLAY button on the remote. - Page 11 Press this button when the Home Screen is open to scroll playback standby. CD-TEXT file names and data in the information area of the When the ON LINE button on a connected TASCAM Home Screen. RC-9010/RC-9010S remote control (sold separately) is...
-
Page 12: Rear Panel
REMOTE (SERIAL) This D-Sub 15-pin I/O connector is for serial control. WORD SYNC THRU Connect a TASCAM RC-9010/RC-9010S remote control (sold The input word clock signal is thru output from this separately) here. connector, allowing it to be sent to other digital devices. -
Page 13: Home Screen
A-B repeat playback function is ON REPEAT A-B NOTE The A-B repeat playback function will only be displayed if selected using a TASCAM RC-9010/RC-9010S remote controller (sold separately). Playback level meters PITCH indicator These show the playback level. -
Page 14: Menu Structure
Export cue lists to CF cards P. 34 CUE LIST EXPORT Cue point loading P. 34 CUE POINT LOAD Fader function for TASCAM RC-9010/RC-9010S or other external P. 48 FADER MODE remote (sold separately) Fader start function for TASCAM RC-9010/RC-9010S or other P. 48 FADER ... - Page 15 Save MENU settings to a CF card P. 45 MENU EXPORT Restore factory settings P. 46 FACTORY PRESET Show information about the media in the current device P. 46 MEDIA INFO INFORMATION Check the system version and operating time P. 46 SYSTEM INFO TASCAM CD-9010CF...
-
Page 16: Menu Operation Basics
To change a menu item or a setting item, press the MENU button to show submenu items and return to step 1. • To change the selected setting item, turn the DATA dial. Press the HOME button to return to the Home screen. TASCAM CD-9010CF... -
Page 17: Preparations
Do not turn the power OFF when the unit is in use (recording, playing back, writing data to a CF card, etc.). Doing so could cause data transfers to fail, corruption of data, sudden loud noise to be emitted from monitoring equipment, damage to equipment and harm to hearing. TASCAM CD-9010CF... -
Page 18: Adjusting The Display
This operation only adjusts the contrast of this unit. It does • The display and indicator BRIGHTNESS settings are retained not adjust the contrast of a connected TASCAM RC-9010/ even when the power is turned OFF. RC-9010S remote control (sold separately). -
Page 19: Inserting And Ejecting Cf Cards
Pull the CF card out the rest of the way. Using the security screw The included security screw can be used to lock the card slot door. Use a Phillips screwdriver to install or remove the security screw. Close the card slot door. TASCAM CD-9010CF... -
Page 20: Connecting Headphones
Turn the DATA dial to set whether or not you can use the front panel controls to control the unit. • : The unit can be controlled using a TASCAM RC- CD+RC 9010/RC-9010S remote control (sold separately) and the unit's front panel buttons. -
Page 21: Playback
Status of outputs Output Status DIGITAL OUTPUT LINE OUTPUTS MONITOR OUTPUTS NOTE Set the SYSTEM menu MON MUTE ONLINE item to OFF to always send the signal through the MONITOR OUTPUTS. (See "Muting monitoring when online" on page 45.) TASCAM CD-9010CF... -
Page 22: Playing A Track Once From The Beginning
NOTE connected to the unit's PHONES jack. • When using a TASCAM RC-9010/RC-9010S remote control After checking the signal, press the STANDBY button. (sold separately), you can assign automatic cue points to •... -
Page 23: Setting The Playback Point
Turn the DATA dial to set the desired auto cue level. • Values: (6 dB steps, default –24 dB –72 dB –24 dB 10. After setting the value, press the HOME button to return to the Home Screen. TASCAM CD-9010CF... -
Page 24: Auto Ready Function
PLAY starts playback of the first track on the current device media. Pressing STOP pauses at the beginning of the first track on the current device. • The incremental playback function setting is retained even when the power is turned OFF. TASCAM CD-9010CF... -
Page 25: Online Back Cue Function
If this function is on, when the ON LINE button is turned OFF When the ON LINE button is turned OFF on a connected on a connected TASCAM RC-9010/RC-9010S remote control TASCAM RC-9010/RC-9010S remote control (sold separately), the (sold separately), the unit immediately enters playback standby PLAY button operates as described below. -
Page 26: Monitor Play Stby Function
: Pause and start playback standby at the last BACK CUE cue point. After setting the value, press the HOME button to return to the Home Screen. NOTE The ONLINE PLAY STBY setting is retained even when the power is turned OFF. TASCAM CD-9010CF... -
Page 27: Eom Functions
If EOM TRACK is set to 0s, when the track ends, a pulse of about 100 ms will be output. How to use the end check function When using a TASCAM RC-9010/RC-9010S remote control (sold After completing the setting, press the HOME button to separately), press the TRACK/[END CHK] button while pressing return to the Home Screen. -
Page 28: Pitch Control Playback
Even when the pitch control function is turned OFF, the pitch control value set above is stored and will be used when the pitch control function is turned ON again. • The pitch step setting is retained even when the power is turned OFF. TASCAM CD-9010CF... -
Page 29: Program And Cue Playback
DATA dial to that is different from the one used by the program, a “–Can't open the menu. PROGRAM Play Program–” message will appear and playback will not start. Turn the DATA dial to select ADD PROGRAM TASCAM CD-9010CF... -
Page 30: Clearing A Program
11. Press the HOME button to return to the Home Screen. Press the DATA dial to remove the selected track. After the track is removed, the screen reopens. PROGRAM Press the HOME button to return to the Home Screen. TASCAM CD-9010CF... -
Page 31: Importing Programs
Press the DATA dial again to start exporting the program. When the program export is complete, the pop-up disappears and the menu screen reopens. PROGRAM/CUE Press the HOME button to return to the Home Screen. Turn the DATA dial to select ADD CUE TASCAM CD-9010CF... -
Page 32: Clearing The Cue List
Press the HOME button to return to the Home Screen. Press the DATA dial to clear all cue points in the cue list. After the cue points have been cleared, the list screen reopens. Press the HOME button to return to the Home Screen. TASCAM CD-9010CF... -
Page 33: Editing Cue Point Names
Cue point names can be up to six single-byte characters in length. • You can connect a USB computer keyboard to the KEYBOARD connector on the rear panel of the unit and use it to edit text. (See "9 – Operation using a computer keyboard" on page 47.) TASCAM CD-9010CF... -
Page 34: Importing Cue Lists
ON again. (The cue list will not be loaded immediately when set to LOAD.) • When set to UNLOAD, exporting the cue points will not export the recently added ones. (It will export the points added when last set to LOAD.) TASCAM CD-9010CF... -
Page 35: Working With Files And Folders
Home Screen and play that file or folder. • STANDBY button When a file or folder is selected, press the to return to the Home Screen and put that file or folder into playback standby. TASCAM CD-9010CF... -
Page 36: Folder Operations
255. • You can connect a USB computer keyboard to the KEYBOARD connector on the rear panel of the unit and use it to edit text. (See "9 – Operation using a computer keyboard" on page 47.) TASCAM CD-9010CF... -
Page 37: Editing File Names (Cf Cards)
255. • You can connect a USB computer keyboard to the KEYBOARD connector on the rear panel of the unit and use it to edit text. (See "9 – Operation using a computer keyboard" on page 47.) TASCAM CD-9010CF... -
Page 38: Creating New Folders (Cf Cards)
• You can connect a USB computer keyboard to the KEYBOARD connector on the rear panel of the unit and use it to edit text. (See "9 – Operation using a computer keyboard" on page 47.) TASCAM CD-9010CF... -
Page 39: Managing Cf Cards
7.. When formatting is complete, the pop-up disappears and • Select to cancel formatting. n:menu the Home Screen reopens. When formatting is complete, the pop-up disappears and the Home Screen reopens. TASCAM CD-9010CF... -
Page 40: Ripping Cd Tracks To Cf Cards
Turn the DATA dial to select the source track to be copied. Select to select the entire disc as the source. CD-DA DISC The remaining available space on the CF card is shown at the top right of the screen. When writing is complete, the CD menu screen reopens. TASCAM CD-9010CF... -
Page 41: Other Settings And Information Display
When this setting is selected, the output from the MONITOR OUTPUTS will be +4 dBu unless the digital reference level is set to –9 dBFS. • This analog reference level setting is retained even when the power is turned OFF. TASCAM CD-9010CF... -
Page 42: Adjusting R/L Analog Reference Levels
, 0.1dB controlled through the parallel remote connector, the increments) serial remote connector, and by a TASCAM RC-9010/ RC-9010S remote controller (sold separately). When After completing the setting, press the HOME button to this unit is used alone, online playback mode is ON by return to the Home Screen. -
Page 43: Setting The Master Word Clock
The sampling rate converter (SRC) function is turned ON and OFF automatically. • If the clock is interrupted when synchronized with a 48kHz external clock, the unit will switch to internal clock, the sampling rate converter (SRC) function will turn ON and output will continue at 48 kHz. TASCAM CD-9010CF... -
Page 44: Setting The Level Meter Display Type
Turn the DATA dial to set the fail safe function. Options: (default value), LOW LIM UP LIM After completing the setting, press the HOME button to return to the Home Screen. NOTE The fail safe setting is retained even when the power is turned OFF. TASCAM CD-9010CF... -
Page 45: Monitoring Point Setting
When exporting complete, the pop-up disappears and menu screen reopens. SYSTEM Press the HOME button to return to the Home Screen. NOTE The LCD CONTRAST, LCD BRIGHTNESS and LED BRIGHTNESS settings of the SYSTEM menu are not exported. TASCAM CD-9010CF... -
Page 46: Restoring The Factory Settings
When you are finished checking, press the HOME button Select MEDIA INFO to return to the Home Screen. Press the DATA dial to show information about the media in the current device, including its used space and amount of free space. TASCAM CD-9010CF... -
Page 47: Operation Using A Computer Keyboard
The following symbols and punctuation marks cannot be NOTE used in names. The KEYBOARD setting is retained even when the power is turned ¥ /: ;, * ? " < > | OFF. • Japanese katakana cannot be used. TASCAM CD-9010CF... -
Page 48: 10 - Using The Remote Connectors
RC-9010S remote control (sold separately) will be turned OFF automatically, and its FADER START button indicator will be unlit. Set whether or not the use of a fader on a TASCAM RC-9010/ In this state, if you press the FADER START button on the remote RC-9010S remote control (sold separately) is enabled. -
Page 49: Fader Stop Action Setting
Transmission speed setting When the fader start function is ON, you can set whether using You can set the transmission speed (baud rate) used with a TASCAM the fader stop function (lowering the fader to ∞) on a TASCAM RC-9010/RC-9010S remote control (sold separately) or other remote RC-9010/RC-9010S remote control (sold separately) causes control using serial protocol. -
Page 50: Using The Parallel Connector
CF_TALLY CUE UP_TALLY – +5V* – Active low external command reception (operates when at ground 50 ms or longer) OUT: Signal for tally output display by open collector (50V maximum voltage, 100mA maximum current) *100mA maximum supplied current TASCAM CD-9010CF... -
Page 51: 11 - Message List
If one of the following error messages appears in a pop-up, press the DATA dial to close the message. Then try to resolve the issue. If you are still unable to correct the problem, please contact the dealer from which you purchased the unit or a TASCAM service center (see the back cover of this manual). -
Page 52: 12 - Troubleshooting
If you are still unable to resolve the problem please contact the retailer where you purchased the unit or TASCAM customer support (see the back cover). Power does not turn on Confirm that the power plug is inserted completely. -
Page 53: 13 - Specifications
Dynamic range 95 dB or more Digital audio output Channel separation DIGITAL OUT 95 dB or more Connector: BNC NOTE Format: AES3-2003/AES-3id-2001/IEC60958-4 (AES/EBU) All audio performance ratings are for playback according to Output impedance: 75 Ω JEITA CP-2150 standards TASCAM CD-9010CF... -
Page 54: Backup Memory
RS-232C, digital output, analog output, online, Operating temperature range master clock, mono mix playback, level meter display, fail 5–35º C (41–95º F) safe, monitoring point, online monitor muting, display and Installation angle indicator brightness, display contrast, keyboard type 5º or less Dimensional drawings TASCAM CD-9010CF... - Page 55 Notes TASCAM CD-9010CF...
- Page 56 CD-9010CF TEAC CORPORATION tascam.jp Phone: +81-42-356-9143 1-47 Ochiai, Tama-shi, Tokyo 206-8530 Japan TEAC AMERICA, INC. tascam.com Phone: +1-323-726-0303 7733 Telegraph Road, Montebello, California 90640 USA TEAC CANADA LTD. tascam.com Phone: +1905-890-8008 Facsimile: +1905-890-9888 5939 Wallace Street, Mississauga, Ontario L4Z 1Z8, Canada TEAC MEXICO, S.A.