Table of Contents
Advertisement
Entering the PIN Code
When the PIN verification is enabled, you need to enter the correct PIN code to use the
network-related functions.
1. After the Optus Wireless Broadband is launched, the Enter PIN dialog box is
prompted.
2. Enter the correct PIN code.
3. Click OK to complete the verification.
Note:
If you enter wrong PIN codes for a preset number of times, the SIM/USIM card is
locked and you cannot use it until you enter the PUK code. The Optus Wireless
Broadband prompts you the remaining number of attempts for entering the PIN
code or the PUK code.
Unlocking the PIN
1. When the SIM/USIM card is locked, the Unlock PIN dialog box is displayed after you
start the Optus Wireless Broadband.
2. Enter the correct PUK code.
3. Enter the new PIN code.
4. Click OK to complete the modification.
Choosing a Device
The Optus Wireless Broadband can support different terminal products.
When the Optus Wireless Broadband is launched, it searches the matched terminal
automatically. If two or more terminals are found, the connected terminals are displayed on
the Choose Device interface. You can choose a terminal to run and click OK.
If two or more supported terminals are connected with the PC, you can change or choose a
device during the running of the Optus Wireless Broadband.
1. Choose Tools > Choose Device.
2. Select a device in the device list.
3. Click OK to terminate the current terminal and switch to the selected one.
Viewing Diagnostic Information
Choose Tools > Diagnosis to view the information of the Optus Wireless Broadband and
SIM/USIM card, such as the number of messages and contacts saved in the SIM/USIM
card, firmware version, hardware version, and IMSI number.
16
Hide quick links:
Advertisement
Table of Contents
