SPA Interface Processor Slot Numbering
Figure 4-4
ASR 1002
pwr
stat
1
2
The Cisco integrated ASR1000-SIP10 (in the Cisco ASR 1002 Router) supports one built-in 4xGE SPA
and three half height SPAs in any one of the following configurations:
•
•
The Cisco ASR 1000 Series SPA interface processor houses SPA bay 2 and SPA bay 3. SPA bay 0 and
SPA bay 1 are physically located on Cisco integrated ASR1000-RP1. A portion of the Cisco integrated
ASR1000-RP1 is reserved to provide connectivity between SPA bay 1 and the Cisco integrated
ASR1000-SIP10.
The integrated Cisco ASR1000-RP1 subslot 1 must communicate to subslot 3 of the integrated SIP when
Note
running a full height SPA in subslot 1.
Cisco ASR 1002-F Router
In the Cisco ASR 1002-F Router, the Cisco ASR1002-SIP10-F supports:
•
•
Note
Figure 4-5
Cisco ASR 1000 Series Aggregation Services Routers Hardware Installation Guide
4-6
Cisco ASR1002-SIP10 Interface Subslot Numbering
1
PWR
ACTV
STAT
STBY
ASR1000-ESP10
STAT
QE0
QE1
QE2
QE3
BOOT
min
maj
crit
2
Cisco integrated ASR1000-RP1 subslot 0
SPA subslot 2
Built-in 4xGE SPA in bay 0 and three half height SPAs in bay 1, 2, 3.
Built-in 4xGE SPA in bay 0, one half height SPA in bay 2, and one full height SPA in bay 1.
Three removable half-height SPAs in Bays 1, 2, and 3
The fourth SPA is a built-in 4xGE SPA on Bay 0 located on the Cisco ASR 1000 Series RP1
The shared port adapter on the Cisco ASR1002-SIP10-F supports online insertion and removal.
However, the Cisco ASR1002-SIP10-F in the Cisco ASR 1002-F Router is built into the chassis
and is not a field-replaceable unit.
shows the slot numbering for the Cisco ASR 1002-F Router.
Chapter 4
Cisco ASR 1000 Series Router SPA Interface Processors (SIPs)
LINK
PWR
STAT
SPA-4XOC3-POS
3
SPA subslot 1
4
SPA subslot 3
3
SPA-4XOC3-POS
SPA-4XOC3-POS
4
OL-13208-11