free hit counter

Cisco ASR 1000 series Hardware Installation Manual page 186

Aggregation services routers
Table of Contents

Advertisement

Attaching the Chassis Rack-Mount Brackets
To install the front rack-mount brackets on the Cisco ASR 1004 Router, perform the following steps:
Locate the threaded holes on the rear side of the chassis. Make certain that you hold the rear rack-mount
Step 1
bracket with the ear and holes facing outward and towards the rear of the chassis.
Figure 7-9
Figure 7-9
1
Rear rack-mount bracket ear and holes
2
Rear rack-mount bracket (first bracket to
attach to chassis)
Position the rear rack-mount bracket top hole with the chassis second top hole from the back (see
Step 2
Figure
Insert and tighten the five screws on one side.
Step 3
After the bracket is secured to the side of the chassis, slide the two remaining components into the side
Step 4
rack-mount bracket.
Repeat Step 1 through Step 3 on the other side of the chassis. Use five screws to secure the rear
Step 5
rack-mount brackets to the chassis.
This completes the steps for attaching the rear rack-mount brackets to the Cisco ASR 1004 Router.
Before you mount the Cisco ASR 1004 Router in a rack, make certain you read which rack-mount
Caution
bracket ear holes to use when positioning the chassis in the rack. As a result of using the designated ear
holes on the rack-mount bracket, the cable-management bracket installation will be made easier. For
cable-management installation instructions, go to the
Cisco ASR 1000 Series Aggregation Services Routers Hardware Installation Guide
7-12
shows where to attach the rear rack-mount brackets to the Cisco ASR 1004 Router.
Attaching the Rear Rack-Mount Brackets to the Cisco ASR 1004 Router
1
1
0
7-9).
Chapter 7
Cisco ASR 1004 Router Overview and Installation
1
2
3
Rear rack-mount bracket components that
slide into rear bracket that is attached to the
chassis
4
Rear rack-mount bracket screws
"Attaching a Chassis Ground Connection" section
3
4
OL-13208-11

Advertisement

Table of Contents
loading

This manual is also suitable for:

Asr 1000 series

Table of Contents