Table of Contents
Advertisement
Attaching a Chassis Ground Connection
Have the recommended tools and supplies available before you begin this procedure.
This equipment must be grounded. Never defeat the ground conductor or operate the equipment in the
Warning
absence of a suitably installed ground conductor. Contact the appropriate electrical inspection
authority or an electrician if you are uncertain that suitable grounding is available. Statement 1024
Before you connect power or turn on power to your chassis, you must provide an adequate chassis ground
(earth) connection for the chassis. A chassis ground connector is provided on each Cisco ASR 1004
Router. (See
–48 VDC power supply (primary grounding stud).
The grounding wire is always the first to be installed or connected and the last to be removed or
Caution
disconnected.
Recommended Tools and Supplies
The following tools, equipment, and supplies necessary to connect the system ground to the chassis:
•
•
•
Figure 7-12
Figure 7-12
1
1
Use the following procedure to attach the grounding lug to the chassis ground connector on your chassis:
Use the wire stripper to strip one end of the AWG #6 wire approximately 0.75 inches (19.05 mm).
Step 1
Insert the AWG #6 wire into the wire receptacle on the grounding lug.
Step 2
Use the crimping tool to carefully crimp the wire receptacle around the wire; this step is required to
Step 3
ensure a proper mechanical connection.
Cisco ASR 1000 Series Aggregation Services Routers Hardware Installation Guide
7-18
Figure 7-12 on page
Phillips screwdriver
Dual-lug chassis ground component
Grounding wire
shows the location of the dual ground lug on the rear of the of Cisco ASR 1004 Router.
Chassis Ground Lug Location on the Cisco ASR 1004 Router
Chassis ground connector on the Cisco ASR 1004 Router
Chapter 7
7-18.) There is a grounding stud on the side of the chassis and on the
HD
USB
CRIT
DF
MAJ
ACTV
PWR
DISK
1
MIN
STBY
0
STAT
ASR 1000 -RP
1
Cisco ASR 1004 Router Overview and Installation
-POS
SPA-4 XOC3
SPA-4 XOC3
-POS
SPA-4 XOC3
-POS
-POS
-POS
SPA-4 XOC3
SPA-4 XOC3
-POS
SPA-4 XOC3
SPA-4 XOC3
-POS
SPA-4 XOC3
-POS
AUX
LINK
CON
MGMT ETHER
NET
CARR IER
BITS
OL-13208-11
Advertisement
Chapters
Table of Contents
Troubleshooting
Related Manuals for Cisco ASR 1000 series
Related Products for Cisco ASR 1000 series
- Cisco ASR1000-RP1 - ASR 1000 Series Route Processor 1 Router
- Cisco ASR1000-RP2 - ASR 1000 Series Route Processor 2 Router
- Cisco ASR-1000-SIP10
- Cisco ASR 1001
- Cisco ASR1002-5G-SEC/K9 - ASR 1002 VPN+FW Bundle Router
- Cisco ASR1004-20G-SEC/K9 - ASR 1004 VPN+FW Bundle Router
- Cisco ASR1002-10G-VPN/K9 - ASR 1002 VPN Bundle Router
- Cisco ASR1002-5G-HA/K9 - ASR 1002 HA Bundle Router