Cisco ASR 1002 Router Description
•
•
•
•
•
The Cisco ASR 1002 Router supports upgradeable Cisco ASR1000-ESP5 or ASR1000-ESP10 assembly
and the power supply modules as field-replaceable units. The Cisco integrated ASR1000-SIP10 and
Cisco built-in ASR1000-RP1 assemblies are fixed into the chassis and are not upgradeable; but the
shared port adapters in the SIP are field upgradable.
This section contains the following topics:
•
•
•
Front View
Figure 8-1
Figure 8-1
ASR 1002
pwr
stat
1
2
The SPAs in subslots 1-3 are field upgradeable. The SIP that the SPAs reside in is not field-upgradeable
Note
and the Cisco ASR 1000 Series Route Processor is embedded in the chassis and not field upgradeable.
Cisco ASR 1000 Series Aggregation Services Routers Hardware Installation Guide
8-2
Cisco ASR1000-ESP5 or Cisco ASR1000-ESP10 as a field-replaceable unit (FRU)
The Cisco Embedded Route Processor which supports 2MB upgradeable BootROM and 8 GB eUSB
bulk storage.
1 + 1 redundant AC or DC power supplies.
Stratum-3 network clocking per GR-1244-CORE, with T1/E1 BITS interface or SPAs as timing
sources.
A built-in 4x1GE SPA providing four small form-factor pluggable (SFP-based) GE connections,
designated as SPA bay 0.
For information about the SFP transceiver modules that are compatible with Cisco ASR 1002
Built-in Gigabit Ethernet Ports (4x1GE), refer to the "Modular Optics Compatibility" section in
Cisco ASR 1000 Series Aggregation Services Routers SIP and SPA Hardware Installation
Front View, page 8-2
Rear View, page 8-3
Cisco ASR 1002 Router Slot Numbering, page 8-4
shows the Cisco ASR 1002 Router with modules installed.
Cisco ASR 1002 Router—Front View
1
PWR
ACTV
STAT
STBY
ASR1000-ESP10
STAT
QE0
QE1
QE2
QE3
BOOT
min
maj
crit
2
Embedded ASR 1000 Series Route Processor
in the subslot and represents the built in 4xGE
SPA.
SPA subslot 2
Chapter 8
LINK
PWR
STAT
SPA-4XOC3-POS
3
SPA subslot 1
4
SPA subslot 3
Cisco ASR 1002 Router Overview and Installation
3
SPA-4XOC3-POS
SPA-4XOC3-POS
4
Guide.
OL-13208-11