Cisco ASR 1002-F Router Description
Figure 9-3
Figure 9-3
1
0
1
2
3
4
5
Internal fans draw cooling air into the chassis and across internal components to maintain an acceptable
operating temperature. The fans are located at the rear of the chassis. A two-hole ground connector lug
is located on the side of the chassis. Two power supplies, either two AC power supplies or two DC power
supplies, are accessed from the rear of the router.
Use only AC power supplies or DC power supplies in the Cisco ASR 1002-F Router. Do not mix power
Caution
supply types.
Cisco ASR 1002-F Router Slot Numbering
The Cisco ASR 1002-F Router contains:
•
•
•
•
•
Cisco ASR 1000 Series Aggregation Services Routers Hardware Installation Guide
9-4
shows the rear of the Cisco ASR 1002-F Router with DC power supplies installed.
Cisco ASR 1002-F Router With DC Power Supplies—Rear View
2
3
4
OUTPUT INPUT
FAN
FAIL
OK
OK
This unit might have more than
one power supply connection.
All connections must be removed
to de-energize the unit.
-48V/-60V
16A
10
9
8
Chassis ESD socket
DC power supply slot 0 label
DC power supply Standby/On (|) switch
DC power supply LEDs
Fan
One Cisco integrated RP— R0
One integrated Cisco ASR1000-ESP-F forwarding processor— F0
One integrated ASR1002-SIP10-F—slot 0
4-Gigabit Ethernet built-in interface—slot 0/0
SPA-5x1GE-V2—slot 0/1
Chapter 9
5
6
6
Captive installation screw
7
DC power supply slot 1 label
8
Ground lead
9
Positive lead
10 Negative lead
Cisco ASR 1002-F Router Overview and Installation
OUTPUT INPUT
FAN
FAIL
OK
OK
This unit might have more than
one power supply connection.
All connections must be removed
to de-energize the unit.
-48V/-60V
16A
1
7
OL-13208-11