free hit counter

Cisco ASR 1000 series Hardware Installation Manual page 275

Aggregation services routers
Table of Contents

Advertisement

Chapter 9
Cisco ASR 1002-F Router Overview and Installation
This completes the procedure for installing the chassis on a two-post rack. Proceed to the
Chassis Ground Connection" section on page 9-23
Four-Post Rack Installation
The Cisco ASR 1002-F Router can be flush-mounted in a 19-inch equipment rack using the
rack-mounting kit provided with your system. When handling the chassis, always follow proper lifting
practices. See the
Inner clearance (the width between the inner sides of the two posts or rails) must be at least 19 inches
Note
(48.26 cm). The height of the chassis is 3.47 inches (8.8 cm). Airflow through the chassis is from front
to back.
Make sure the rack is stabilized.
Caution
(Optional) Install a shelf in the rack to support the Cisco ASR 1002-F Router. If you are using a shelf,
Step 1
raise the chassis to the level of the shelf. Let the bottom of the chassis rest on the brackets, but continue
to support the chassis. Lift the chassis into the rack, grasping underneath the power supply bays.
Step 2
Position the chassis until the rack-mounting flanges are flush against the mounting rails on the rack.
Use the second hole up from the bottom of the rack-mount bracket and the second hole down from the
Note
top of the rack-mount bracket. This will make it easier to attach the cable-management brackets to the
chassis in the equipment rack.
Hold the chassis in position against the mounting rails while the second person finger-tightens a screw
Step 3
to the rack rails on each side of the chassis.
Tighten the screws to the rack rails on each side of the chassis.
Step 4
Tighten all the screws on each side to secure the chassis to the equipment rack.
Step 5
OL-13208-11
"Chassis-Lifting Guidelines" section on page
Cisco ASR 1000 Series Aggregation Services Routers Hardware Installation Guide
Installing the Cisco ASR 1002-F Router in a Rack
to continue the installation.
5-23.
"Attaching a
9-21

Advertisement

Table of Contents
loading

This manual is also suitable for:

Asr 1000 series

Table of Contents