Table of Contents
Advertisement
Attaching a Chassis Ground Connection
Have the recommended tools and supplies available before you begin this procedure.
This equipment must be grounded. Never defeat the ground conductor or operate the equipment in the
Warning
absence of a suitably installed ground conductor. Contact the appropriate electrical inspection
authority or an electrician if you are uncertain that suitable grounding is available. Statement 1024
Before you connect power or turn on power to your router, you must provide an adequate chassis ground
(earth) connection for the Cisco ASR 1002-F Router. The chassis grounding lug and the respective
screws are provided in the accessory kit that ships with your Cisco ASR 1002-F Router.
The grounding wire is always the first to be installed or connected and the last to be removed or
Caution
disconnected.
Figure 9-18
Figure 9-18
1
1
Cisco ASR 1002-F Router ground connector
location
To attach the grounding lug to the chassis ground connector on your chassis, follow these steps:
Step 1
Use the wire stripper to strip one end of the AWG #6 wire approximately 0.75 inches (19.05 mm).
Cisco ASR 1000 Series Aggregation Services Routers Hardware Installation Guide
9-24
shows the location of the ground connector on the side of the Cisco ASR 1002-F Router.
Cisco ASR 1002-F Router Chassis Ground Lug Location and eUSB Side Panel Door
2
Chapter 9
Cisco ASR 1002-F Router Overview and Installation
0
2
eUSB panel door
C3-P OS
SPA -4XO
OL-13208-11
Advertisement
Chapters
Table of Contents
Troubleshooting
Related Manuals for Cisco ASR 1000 series
Related Products for Cisco ASR 1000 series
- Cisco ASR1000-RP1 - ASR 1000 Series Route Processor 1 Router
- Cisco ASR1000-RP2 - ASR 1000 Series Route Processor 2 Router
- Cisco ASR-1000-SIP10
- Cisco ASR 1001
- Cisco ASR1002-5G-SEC/K9 - ASR 1002 VPN+FW Bundle Router
- Cisco ASR1004-20G-SEC/K9 - ASR 1004 VPN+FW Bundle Router
- Cisco ASR1002-10G-VPN/K9 - ASR 1002 VPN Bundle Router
- Cisco ASR1002-5G-HA/K9 - ASR 1002 HA Bundle Router