Table of Contents
Advertisement
Attaching a Chassis Ground Connection
Figure 10-15
1002-X Router in a rack.
Figure 10-15
3
1
2
Using the bottom rack mount ear hole, insert the screw through cable management bracket and into the
Step 3
chassis rack mount (see
This completes the procedure for installing the cable management brackets on the chassis.
Attaching a Chassis Ground Connection
Connecting the Cisco ASR 1002-X chassis to ground is required for all DC-powered installations and
AC-powered installation where compliance with Telcordia grounding requirements is necessary.
Caution
The dual-lug chassis ground stud must be installed and all the cards and filler plates must be fully
inserted, screwed in, and earthed to prevent a potential hazard in a telecom line.
Have the recommended tools and supplies available before you begin this procedure.
Warning
This equipment must be grounded. Never defeat the ground conductor or operate the equipment in the
absence of a suitably installed ground conductor. Contact the appropriate electrical inspection
authority or an electrician if you are uncertain that suitable grounding is available. Statement 1024
Before you connect power or turn on power to your chassis, you must provide an adequate chassis ground
(earth) connection for the chassis. The chassis ground lug (two) and the respective screws (four) are
provided in the accessory kit that shipped with your Cisco ASR 1002-X Router.
Cisco ASR 1000 Series Aggregation Services Routers Hardware Installation Guide
10-26
shows the locations at which to attach the front rack mount brackets to the Cisco ASR
Chassis Rack Mount Bracket Ear Holes for the Cable Management Brackets
1
Secure the cable management top screw and
bottom to this ear hole
Cable-management bracket
Figure
Chapter 10
3
Front rack mount bracket
—
10-15).
Cisco ASR 1002-X Router Overview and Installation
OL-13208-11
Advertisement
Chapters
Table of Contents
Troubleshooting
Related Manuals for Cisco ASR 1000 series
Related Products for Cisco ASR 1000 series
- Cisco ASR1000-RP1 - ASR 1000 Series Route Processor 1 Router
- Cisco ASR1000-RP2 - ASR 1000 Series Route Processor 2 Router
- Cisco ASR-1000-SIP10
- Cisco ASR 1001
- Cisco ASR1002-5G-SEC/K9 - ASR 1002 VPN+FW Bundle Router
- Cisco ASR1004-20G-SEC/K9 - ASR 1004 VPN+FW Bundle Router
- Cisco ASR1002-10G-VPN/K9 - ASR 1002 VPN Bundle Router
- Cisco ASR1002-5G-HA/K9 - ASR 1002 HA Bundle Router