free hit counter

Cisco ASR 1000 series Hardware Installation Manual page 372

Aggregation services routers
Table of Contents

Advertisement

Connecting the System Cables
Figure 11-18
Figure 11-18
Connect one end of the RJ-45 cables to the serial RJ-45 port (CON) on the Cisco ASR1000-RP2 route
Step 1
processor.
Run the cable up and through the cable-management bracket and connect the other end of the RJ-45
Step 2
cable to the RJ-45 adapter,
Connect the adapter to your video terminal to complete the cable connection.
Step 3
Power on your video terminal.
Step 4
Configure your video terminal to match the following default console port settings: 9600 baud, 8 data
Step 5
bits, No parity generation or checking, 1 stop bit, and No flow control.
Go to the
Step 6
Connecting the System Cables
Keep the following guidelines in mind when connecting external cables to the Cisco ASR 1013 Router:
Attaching Cable Retention Bracket on AC Power Supply
This section explains how to attach the cable retention bracket on AC power supply of the chassis.
Cisco ASR 1000 Series Aggregation Services Routers Hardware Installation Guide
11-36
shows the Cisco ASR 1000 Series route processor console port connectors.
Cisco ASR 1000 Series Route Processor Console Port Connectors
1
2
3
CARRIER
LINK
BITS
"Connecting the System Cables" section on page 11-36
To reduce the chance of interference, avoid crossing high-power lines with any interface cables.
Verify all cabling limitations (particularly distance) before powering on the system.
Chapter 11
4
5
MGMT ETHERNET
CON
Cisco ASR 1013 Router Overview and Installation
6
AUX
to continue the installation.
OL-13208-11

Advertisement

Table of Contents
loading

This manual is also suitable for:

Asr 1000 series

Table of Contents