free hit counter

Cisco ASR 1000 series Hardware Installation Manual page 402

Aggregation services routers
Table of Contents

Advertisement

Attaching a Chassis Ground Connection
Recommended Tools and Supplies
The following tools, equipment, and supplies necessary to connect the system ground to the chassis:
Figure 12-19
of the ground lug on Cisco ASR 1000 Series Routers may not be the same on all routers; but the ground
lug attachment instructions are similar.
Figure 12-19
1
2
This equipment must be grounded. Never defeat the ground conductor or operate the equipment in the
Warning
absence of a suitably installed ground conductor. Contact the appropriate electrical inspection
authority or an electrician if you are uncertain that suitable grounding is available. Statement 1024
Before you connect power or turn on power to your chassis, you must provide an adequate chassis ground
(earth) connection for the chassis. A chassis ground connector is provided on each Cisco ASR 1001
Router. There is a stud on the side of the chassis and on the DC power supply (primary grounding stud).
Cisco ASR 1000 Series Aggregation Services Routers Hardware Installation Guide
12-28
Phillips screwdriver
3.5 mm flat blade screwdriver (Phoenix # 1205053 or equivalent 3.5 mm flat blade)
Dual-lug chassis ground component
Grounding wire
shows how to attach the ground lugs on the Cisco ASR 1000 Series chassis. The location
Installing a Ground Connection on the Cisco ASR 1001 Router
2
2
1
Chassis ground studs and lead wire
Grounding screws
Chapter 12
Cisco ASR 1001 Router Overview and Installation
4
3
3
Ground connector on the chassis
4
Ground symbol
OL-13208-11

Advertisement

Table of Contents
loading

This manual is also suitable for:

Asr 1000 series

Table of Contents