Table of Contents
Advertisement
Chapter 14
Removing and Replacing FRUs from the Cisco ASR 1000 Series Routers
If you are returning the Cisco ASR 1000 route processor to the factory, immediately place it in a static
Note
shielding bag.
This completes the procedure for removing an installed Cisco ASR 1000 Series route processor from the
Cisco ASR 1006, Cisco ASR 1004, and Cisco ASR 1013 Router.
Replacing the Cisco ASR 1000 Series Route Processor in the Cisco ASR 1006,
Cisco ASR 1004, and Cisco ASR 1013 Routers
To replace the Cisco ASR 1000 Series route processor (RP1 or RP2) in the Cisco ASR 1006, Cisco ASR
1004, and Cisco ASR 1013 Routers, follow this procedure:
Step 1
Attach an ESD-preventive wrist strap between you and an unfinished chassis surface.
Step 2
Remove the new Cisco ASR 1000 series route processor from its static shielding bag.
Step 3
Using both hands, grasp the Cisco ASR 1000 Series route processor by its metal carrier edges and orient
the it so that its printed circuit board components are upward.
Handle the Cisco ASR 1000 Series route processor by the carrier edges and handle only; never touch the
Caution
printed circuit board components or connector pins.
Align the left and right edges of the Cisco ASR 1000 Series route processor printed circuit board
Step 4
between the route processor slot guides.
Gently slide the Cisco ASR 1000 Series route processor all the way into its chassis slot until you feel the
Step 5
connectors seat with the router midplane.
Seat the route processor in the router midplane by tightening its captive installation screws with a
Step 6
number 2 Phillips or a 3/16-inch flat-blade screwdriver.
This completes the procedure for replacing the Cisco ASR 1000 Series route processor in a Cisco ASR
1006 and Cisco ASR 1004 Router.
Removing and Replacing Cisco ASR 1000 Series Route
Processor Internal Hard Drive
Cisco ASR 1000 Series Routers support the Cisco ASR1000-RP1 and the Cisco ASR1000-RP2 route
processors. This section contains the following topics:
•
•
OL-13208-11
Removing and Replacing the Cisco ASR1000-RP1 Module Internal Hard Drive, page 14-4
Removing and Replacing the Cisco ASR1000-RP2 Module Internal Hard Drive, page 14-9
Cisco ASR 1000 Series Aggregation Services Routers Hardware Installation Guide
Removing and Replacing Cisco ASR 1000 Series Route Processor Internal Hard Drive
14-3
Advertisement
Chapters
Table of Contents
Troubleshooting
Related Manuals for Cisco ASR 1000 series
Related Products for Cisco ASR 1000 series
- Cisco ASR1000-RP1 - ASR 1000 Series Route Processor 1 Router
- Cisco ASR1000-RP2 - ASR 1000 Series Route Processor 2 Router
- Cisco ASR-1000-SIP10
- Cisco ASR 1001
- Cisco ASR1002-5G-SEC/K9 - ASR 1002 VPN+FW Bundle Router
- Cisco ASR1004-20G-SEC/K9 - ASR 1004 VPN+FW Bundle Router
- Cisco ASR1002-10G-VPN/K9 - ASR 1002 VPN Bundle Router
- Cisco ASR1002-5G-HA/K9 - ASR 1002 HA Bundle Router