Chapter 2
Cisco ASR 1000 Series Routers Component Overview
•
•
•
•
•
•
When an unsupported combination of hardware components occurs, the card or cards not supported are
Note
shutdown and an error message occurs. Following each table in this section, a description of the error
message is provided.
To prevent any errors from occurring, read the compatibility tables before you insert any Cisco
ASR 1000 Series Router components on a router running Cisco IOS XE Release 3.1S or later releases.
Hardware Requiring a CPLD Upgrade
For details about Cisco ASR 1000 hardware configuration combinations that require a CPLD field
programmable upgrade for components to be supported in IOS XE Release 3.1S, see
Programmable Hardware Devices for Cisco ASR 1000 Series
Incompatible Hardware Configuration Combinations
Table 2-3
XE Release 3.1S onward.
Table 2-3
Chassis
Cisco ASR 1002 Router
Cisco ASR 1004 Router
Cisco ASR 1006 Router
Cisco ASR 1013 Router
Cisco ASR 1001 Router
Cisco ASR 1002-X
Router
OL-13208-11
Supported hardware before IOS XE Release
Supported hardware from IOS XE Release
Requires
upgrade—Table 2-4
Not
compatible—Table 2-3
Not supported in IOS XE Release
Incompatible
HA—Table 2-4
lists ASR 1000 hardware configuration combinations that are not compatible from Cisco IOS
Incompatible Cisco Hardware Configuration Combinations from IOS XE Release 3.1S
Onward
ASR1000-RP
NA (built in)
—
—
RP1
NA (built in)
NA (built in)
Cisco ASR 1000 Series Aggregation Services Routers Hardware Installation Guide
3.1S—Table 2-3
3.1S—Table 2-3
3.1S—Table 2-4
Routers.
ASR1000-ESP
ASR1000-SIP Result
ESP-20
NA (built in) ESP-20 disabled
ESP-40
ESP-100
ESP-5
—
ESP-100
ESP-5
—
—
—
Integrated
NA (built in) —
embedded
services
processor
Integrated
NA (built in) —
embedded
services
processor
Supported ASR 1000 Hardware Components
Upgrading Field
ESP-40 disabled
ESP-100 disabled
ESP-5 disabled
ESP-100 disabled
ESP-5 disabled
RP1 disabled
2-5