Table of Contents
Advertisement
Removing and Replacing the Cisco ASR 1001 Router Power Supplies
To remove the power cord from PS1, you must position the power supply cable in order to access the
Step 4
power supply fasteners. Hold back the power supply cable in PS0, as shown in
not to unplug the power cable.
Figure 14-79
Continue to hold back the power supply cable in PS0, to gain access to the fastener. Unscrew the both
Step 5
fasteners on the power supply in slot 1.
The Cisco ASR 1001 power supplies are long and narrow. It is recommended that while you pull the
Tip
power supply out of the chassis, support the power supply from the bottom with the other hand.
Once the power supply fasteners are loosened, grasp the handle with one hand and support the weight of
Step 6
power supply with the other hand and pull the power supply out of the slot (see
Figure 14-80
Repeat the same steps to remove the AC power supply from Slot PS0.
Step 7
This completes the procedure for removing an AC power supply from the Cisco ASR 1001 Router.
Cisco ASR 1000 Series Aggregation Services Routers Hardware Installation Guide
14-106
Chapter 14
Positioning the AC Power Supply Cable in Slot PS0
Removing the Cisco ASR 1001 Router AC Power Supply Cables
Removing and Replacing FRUs from the Cisco ASR 1000 Series Routers
Figure 14-79
making sure
Figure
14-80).
OL-13208-11
Advertisement
Chapters
Table of Contents
Troubleshooting
Related Manuals for Cisco ASR 1000 series
Related Products for Cisco ASR 1000 series
- Cisco ASR1000-RP1 - ASR 1000 Series Route Processor 1 Router
- Cisco ASR1000-RP2 - ASR 1000 Series Route Processor 2 Router
- Cisco ASR-1000-SIP10
- Cisco ASR 1001
- Cisco ASR1002-5G-SEC/K9 - ASR 1002 VPN+FW Bundle Router
- Cisco ASR1004-20G-SEC/K9 - ASR 1004 VPN+FW Bundle Router
- Cisco ASR1002-10G-VPN/K9 - ASR 1002 VPN Bundle Router
- Cisco ASR1002-5G-HA/K9 - ASR 1002 HA Bundle Router