Removing and Replacing the Cisco ASR 1001 Router Power Supplies
Repeat Step 6 through Step 8 for the remaining two DC input power source wires, the positive lead wire
Step 9
and the negative lead wire (see
Figure 14-86
1
2
Secure the wires coming in from the terminal block plug so that they cannot be disturbed by casual
Caution
contact.
Cisco ASR 1000 Series Aggregation Services Routers Hardware Installation Guide
14-112
Inserting the DC Power Supply Terminal Block Plug in the Block Header
DC power supply negative (-) lead wire
DC power supply positive (+) lead wire
Chapter 14
Removing and Replacing FRUs from the Cisco ASR 1000 Series Routers
Figure
14-86).
3
DC power supply ground lead wire
— —
OL-13208-11