free hit counter

Cisco ASR 1000 series Hardware Installation Manual page 58

Aggregation services routers
Table of Contents

Advertisement

Cisco ASR 1000 Series Route Processor
Table 2-8
LED Label
MIN
MAJ
CRIT
BOOT
CARRIER
LINK
4 LEDs
PWR
STAT
The built-in Gigabit Ethernet ports on the Cisco ASR 1002 Router support the same small form-factor pluggable (SFP) optical
transceivers as the 5x1 GE SPA. Note that the Cisco ASR 1002 built-in GE ports support only the SFP-GE-T but not the
SFP-GLC-T.
Cisco ASR 1000 Series Aggregation Services Routers Hardware Installation Guide
2-18
Cisco Embedded ASR1000-RP1 LEDs in the Cisco ASR 1002 Router (continued)
LED
Color —State
Yellow
Red
Minor
Amber
Major
Red
Critical
Red
eUSB0 FLASH
Flashing Green
(BootDisk
Off
Off
Green
Amber
10/100 /1000 RJ-45
Green
Interface LED
Flashing Green
Off
Built-in SPA SFP
Off
port status
Amber
Green
Carrier card power
Green
Carrier card status
Green
Yellow
Red
Chapter 2
Cisco ASR 1000 Series Routers Component Overview
Behavior Description
ROMMON is running or when the Process
Manager declares that a critical ASR 1000
Series RP1 process is not running
System failure or powering up.
Minor alarm indicator.
Major alarm indicator.
Critical alarm indicator.
Activity indicator.
No activity.
Out of service or not configured.
In frame and working properly.
Fault or loop condition.
Link with no activity.
Link with activity.
No link.
Port is not enabled.
Port enabled but there is a problem with the
Ethernet link.
Port enabled, valid Ethernet link
All carrier card requirements are within
specification.
Only when the SPA drivers have started and
are running and all critical processes are
running
When ROMMON is running and during the
download and boot of the operating system
A fault is detected or the card is powering
up.
OL-13208-11

Advertisement

Table of Contents
loading

This manual is also suitable for:

Asr 1000 series

Table of Contents