Chapter 2
Cisco ASR 1000 Series Routers Component Overview
Table 2-9
description.
Table 2-9
Label
BITS
MGMT
CON
AUX
Figure 2-4
Figure 2-4
4
1
F0 slot
2
R0 slot
Note
Unless otherwise noted, features for the Cisco ASR 1002-F Router are the same as the Cisco ASR 1002
Router. The Cisco ASR1002-ESP-F supports 2.5 Gbps, and it is integrated in the chassis. It is not a
field-replaceable unit.
OL-13208-11
lists the Cisco embedded ASR1000-RP1in the Cisco ASR 1002 Router connectors and
Cisco Embedded ASR1000-RP1 Connectors
Type
Standard E1/T1 RJ-45
connector
One RJ-45 jack for
copper Ethernet
Management Ethernet
Port
One RJ-45 for CON
One RJ-45 for AUX
shows a fully loaded Cisco ASR 1002 Router.
Cisco ASR 1002 Router Route Front View
3
Cisco ASR 1000 Series Aggregation Services Routers Hardware Installation Guide
Description
Indicates BITS timing references.
The route processor has an ENET port with a RJ-45
connector to attach a management device or network
for network management.
Console port used to connect to a terminal.
Auxiliary port used for remote management
purposes.
PWR STAT
CON
AUX
MGMT
LINK
MTS
CARR IER
BOOT
QE3
QE2
QE1
QE0
STAT
AS R 100 2
min
stat
maj
pwr
SPA-4 XOC3-
POS
crit
3
The eUSB panel door on the side of the Cisco
ASR 1002 Router must not be opened. There
is a Do Not Tamper label on the panel door.
Do not remove the label. If there is a problem
with eUSB flash card, the chassis should be
returned.
4
Grounding stud location
Cisco ASR 1000 Series Route Processor
1
2
SPA-4 XOC3-
POS
SPA-4 XOC3-
POS
2-19