free hit counter

Cisco ASR 1000 series Hardware Installation Manual page 77

Aggregation services routers
Table of Contents

Advertisement

Chapter 2
Cisco ASR 1000 Series Routers Component Overview
Cisco ASR 1002 AC Power Supply LEDs and Connector
Figure 2-11
ASR 1002 Router supports up to two power supplies.
Figure 2-11
1
2
3
4
Table 2-20
Table 2-20
Cisco ASR 1002 Router Power Supply LEDs
LED Label
LED
INPUT OK
Power supply activity
FAN OK
Bi-color LED indicates
fan status
OUTPUT FAIL
Power supply activity
OL-13208-11
shows the AC power supplies at the rear of the Cisco ASR 1002 Router. The Cisco
Cisco ASR 1002 Router AC Power Supply
1
2
3
4
OUTPUT INPUT
FAN
FAIL
OK
OK
0
This unit might have more than
one power supply connection.
All connections must be removed
to de-energize the unit.
8
Chassis ESD socket
AC power supply slot number 0
AC power supply On (|) /Off (O) switch
AC power supply LEDs
describes the power supply LEDs and connectors on the rear of the chassis.
Color
Green
None
Green
Red
Red
Cisco ASR 1000 Series Aggregation Services Routers Hardware Installation Guide
Power Supplies for the Cisco ASR 1002 Router
5
6
5
AC power supply fan
6
AC power supply captive installation screw
7
AC power supply slot number 1
8
AC power inlet
Description
LED illuminates green to signal that the power supply
input voltage is greater than 85 V.
If LED is not illuminated, then the input voltage is less
than 70 V or the power supply is turned off. For an AC
input voltage between 70 V and 85V, the INPUT OK LED
can be either on, off, or flashing
LED illuminates green when all fans are operational.
The LED illuminates red when a fan failure is detected.
LED is red and turned off to signal that the AC output
voltages are within the normal operating range; output
voltage between the minimum and maximum limits will
not create an output fail alarm, and output voltages below
the minimum or above the maximum will create an output
fail alarm.
OUTPUT INPUT
FAN
FAIL
OK
OK
This unit might have more than
one power supply connection.
All connections must be removed
to de-energize the unit.
1
7
2-37

Advertisement

Table of Contents
loading

This manual is also suitable for:

Asr 1000 series

Table of Contents