M Transceiver Control - Icom VE-PG3 Instruction Manual
Roip gateway
Hide thumbs
Also See for VE-PG3:
- Instruction manual (326 pages) ,
- Installation (2 pages) ,
- Installation instructions manual (11 pages)
Table of Contents
Advertisement
5
BRIDGE MODE SETTING SCREEN
8. [Port Settings] Menu (continued)
M Transceiver Control
Set the transceiver control details for the [TRX1]/[TRX2] port.
*
i
*Appears only when "SQL" is selected in [Audio Detection Methods from the Transceiver].
q Priority Receive ............
w Audio Transmission Methods to the Transceiver
e Audio Detection Methods from the Transceiver
.................................
[Port Settings]–[Transceiver 1 (TRX1)/[Transceiver 2 (TRX2)]
Select "Enable" to keep receiving, while the transceiver detects the received
audio.
Select the Audio Transmission Method.
• VOX:
Sends the audio signal and enables the PTT, when the
input audio signal level exceeds the threshold level.
• RTP:
Sends the audio signal and enables the PTT, while receiving
the RTP packet.
"General Setting"
• PTT Always-on:
The VE-PG3 always sends the PTT control signal to the radio to transmit.
"General Setting"
• PTT Always-off:
The VE-PG3 doesn't send the PTT control signal to the radio.
Select the Audio Detection Method
• VOX:
According to the input audio signal level.
• SQL:
According to the squelch status (Open/Close).
• Always Receive: Always in the receive mode.
Note: When "IC-F5060/F6060" (default) is selected in [Transceiver Model],
this item is fixed to "VOX."
5-72
(Default: Disable)
"General Setting"
Other than "General Setting"
(Default: VOX)
(Default: RTP)
(Default: VOX)
Advertisement
Chapters
Table of Contents
