M V/Roip Incoming Call Setting - Icom VE-PG3 Instruction Manual
Roip gateway
Hide thumbs
Also See for VE-PG3:
- Instruction manual (326 pages) ,
- Installation (2 pages) ,
- Installation instructions manual (11 pages)
Table of Contents
Advertisement
6
CONVERTER MODE SETTING SCREEN
8. [Extension Connect] Menu (continued)
M V/RoIP Incoming Call Setting
Set the callee destination for each phone number set on the [V/RoIP] Menu.
• This is an example.
q Phone Number ...............
w Line ..............................
e Receive Port ..................
r Ringtone .....................
t Queuing ........................
y <Apply> ........................
u <Reset> ........................
Displays the phone number (Contract Line Number (PSTN), IP Phone
Number (IP line) or SIP URI user name (Peer to Peer)).
Displays the line type.
Select the extension number (dial-in service) or extension group number of
the device (port), when a call to the set number is received.
Select the ring tone type when receives a call.
Note: This item takes effect when "SIP Phone(KX-UT Series)" is selected in
the [Port Type] item on the [Extension Connect] screen.
Select "Enable" to use the Receive Queuing function.
Note: This item appears when "LINE" is selected as the line type.
The Receive Queuing function returns the RBT response status while the
callee's line is busy, to keep calling until the callee's line is open.
Click to apply the change.
Click to restore the settings.
• You cannot restore after clicking <Apply>.
6-45
[Extension Connect]–[Incoming Call]
(Default: Not used)
Advertisement
Chapters
Table of Contents
