Icom VE-PG3 Instruction Manual page 303
Roip gateway
Hide thumbs
Also See for VE-PG3:
- Instruction manual (326 pages) ,
- Installation (2 pages) ,
- Installation instructions manual (11 pages)
Table of Contents
Advertisement
6
CONVERTER MODE SETTING SCREEN
9. [Port Settings] Menu
M Bridge Control (continued)
*
*
!3
!4
*Appears when "G.711u Signaling" is selected in the [Voice Coding] item.
i Disconnect Notice Tone ...
o Send Connect Failure Tone
!0 Notice Tone Volume .........
PTT Control Type from the Telephone
!1 PTT Control Type ............
Select "Tone 1" to "Tone 3" to notify that the IP phone's handset is put on.
Select "Tone 1" to "Tone 3" to notify that the calling IP phone is not available.
Select the tone level for above items.
Range:"+6" to"–12" (dB)
Select the signal type to control the transmission.
• VOX:
• DTMF:
• Always Send during Talking: The VE-PG3 keeps sending the PTT control
6-117
[Port Settings]–[Bridge 1–Bridge 4]
(Default: Notice Tone 3)
(Default: Notice Tone 3)
The communication route is connected when
an audio input is detected.
The communication route is connected when
a DTMF tone is detected.
signal, once the communication route has
been established.
(Default: 0)
(Default: VOX)
Advertisement
Chapters
Table of Contents
