free hit counter
VADDIO RoboSHOT 12 Installation And User Manual
  1. Manuals
  2. Brands
  3. VADDIO Manuals
  4. IP Camera
  5. RoboSHOT 12
  6. Installation and user manual

VADDIO RoboSHOT 12 Installation And User Manual

Roboshot series cameras hd robotic ptz camera systems featuring the quick-connect sr interface
Hide thumbs Also See for RoboSHOT 12:
Table of Contents

Advertisement

Quick Links

See also: User Manual , Installer and User Manual
V
™ R
ADDIO
RoboSHOT 12 and RoboSHOT 30, HD Robotic PTZ Camera Systems
featuring the Quick-Connect™ SR Interface
RoboSHOT 12
High-definition Robotic PTZ Conferencing Camera
Featuring a 12X, 73º Wide Angle Optical Zoom Lens
and Tri-Synchronous Motion
RoboSHOT 12 QSR System, 999-9905-000 (North America), 999-9905-001 (Int'l)
RoboSHOT 30 QSR System, 999-9915-000 (North America), 999-9915-001 (Int'l)
RoboSHOT 30 QSR System, 999-9915-000W (North America), 999-9915-001W (Int'l)
(Note: The W suffix on the part number indicates white version of the RoboSHOT 30)
© 2015 Vaddio - All Rights Reserved. RoboSHOT QSR Systems - Document Number 342-0794 Rev C
SHOT™ S
OBO
High-definition Robotic PTZ Camera for Medium to Large Venues
Featuring 30X Optical Zoom Lens and Tri-Synchronous Motion.
Available in Black or White finishes.
System Model and Part Numbers
Installation and User Guide
C
ERIES
RoboSHOT 30
Quick-Connect SR
System Interface
AMERAS

Advertisement

Table of Contents
loading

Related Manuals for VADDIO RoboSHOT 12

Summary of Contents for VADDIO RoboSHOT 12

  • Page 1 RoboSHOT 30 QSR System, 999-9915-000W (North America), 999-9915-001W (Int’l) (Note: The W suffix on the part number indicates white version of the RoboSHOT 30) © 2015 Vaddio - All Rights Reserved. RoboSHOT QSR Systems - Document Number 342-0794 Rev C...
  • Page 2 RoboSHOT HD Cameras Inside Front Cover Page - Almost Blank RoboSHOT HD Cameras- Document Number 342-0794 Rev C Page 2 of 44...

  • Page 3: Table Of Contents

    Unpacking the Camera Systems ..............................6  Image: RoboSHOT 12 HD PTZ Camera ..........................7  Image: RoboSHOT 30 HD PTZ Camera ..........................8  Image: RoboSHOT 12 and 30 Rear Panel Connections ..................... 9  Quick-Connect SR Interface ............................... 10  Image: Rear Panel with Feature Call-outs ......................... 10 ...

  • Page 4: Overview

    The RoboSHOT platform, paired with the Quick-Connect SR interface, uses the Vaddio EZCamera™ Cat-5 Cable System to transport HSDS™ (differential video), power and control to and from the camera over Cat-5 cables. The QSR system has a single analog component YPbPr output that outputs video resolutions up to and including 1080p/60 and is not limited to 1080i/59.94.
  • Page 5 (ubiquitously referred to as Cat-5 or Cat-5e). For best results, please use quality Cat-5e cable and real RJ-45 crimpers. Unlike phone and data lines that use the four center conductors (pairs 3 & 6 and pairs 4 & 5), the Vaddio EZCamera systems use all of the pins in most configurations.

  • Page 6: Unpacking The Camera Systems

    Identify the following parts for each camera: RoboSHOT 12 QSR System Part Number 999-9905-000 (North America) One (1) RoboSHOT 12 HD PTZ Camera (998-9900-000) One (1) Thin Profile Wall Mount (535-2000-240) with Mounting Hardware One (1) IR Remote Commander (998-2100-000)

  • Page 7: Image: Roboshot 12 Hd Ptz Camera

    RoboSHOT HD Cameras Image: RoboSHOT 12 HD PTZ Camera Camera Front View with Feature Call-outs ① Color: Silver and Black ② ⑤ ③ ⑥ ④ 1) Camera and Zoom Lens: This RoboSHOT model features a 12X optical zoom lens (12X in Super-Wide mode and 10X in normal mode) that is built around an Exmor 1/2.8-Type, high-speed, low noise image sensor with a total...

  • Page 8: Image: Roboshot 30 Hd Ptz Camera

    RoboSHOT HD Cameras Image: RoboSHOT 30 HD PTZ Camera The differences between the 12X model and the 30X models center around the power of the optical zoom lens and overall color of the camera models. The 30X is available in both black and white. ①...

  • Page 9: Image: Roboshot 12 And 30 Rear Panel Connections

    RoboSHOT HD Cameras Image: RoboSHOT 12 and 30 Rear Panel Connections Rear panel connections are identical for both models (RoboSHOT 12 shown). ① ④ ⑤ ② ⑥ ③ 1) CAMERA SETTINGS: DIP switch settings for IR remote frequency, baud rate and image flip can be configured on these switches.

  • Page 10: Quick-Connect Sr Interface

    RoboSHOT HD Cameras SR I UICK ONNECT NTERFACE Image: Rear Panel with Feature Call-outs ① ② ③ ④ ⑤ 1) Power Input: 5.5mm OD x 2.5mm ID coaxial connector for the provided 24 VDC, 2.0 Amp switching power supply. 2) EZ-POWER VIDEO (Color Coded Orange): A single Cat-5 connection between the EZCAMERA POWER &...

  • Page 11: System Configuration Examples

    9F in some circles) to RJ-45F control adapter is supplied. More Notes: Use of pass-thru type RJ-45 connectors is highly discouraged. The Vaddio Cat-5 wiring standard uses pins 1, 2, 7 and 8 on both the power/video and the control Cat-5e cables. The pass-through connectors have proven to provide insufficient connectivity for these important signals.

  • Page 12: Setting The Roboshot Camera Hd Resolution

    Image Flip (SW4): To invert the camera, turn the IMAGE FLIP ON (switch down).  Super-Wide Mode: Super-wide works only with the RoboSHOT 12 model and allows the camera to switch from 67.3º wide end HFOV to a Super Wide 73º wide end HFOV.

  • Page 13: Installation Basics

    The Cat-5e cables should feed-through the cable management slots provided by level the mount… all Vaddio mounting options. If the wall mount is to be mounted on a 2-gang wall box, use the screws supplied with the wall box cover plate to attach the Thin Profile Wall Mount Bracket.

  • Page 14: Controlling The Camera

    RoboSHOT HD Cameras ONTROLLING THE AMERA IR Remote Commander The following functions are accessible with the Vaddio IR remote:  Camera Power On/Off (Toggle on/off same button)  Back Light Compensation (Toggle on/off same button)  Data Screen: Toggle on/off the OSD for the RoboSHOT’s IP/MAC Address ...

  • Page 15: The Screen Shot Tour

    RoboSHOT HD Cameras CREEN The RoboSHOT camera platform uses a Linux OS and has a built-in web server. The internal web pages will allow control of the attached camera via an Ethernet network connection. These web pages will allow the user or administrator to control the camera, set PTZ presets, set security passwords, change the IP address, view diagnostics, access the firmware upgrade page and more! Compatible Web Browsers...

  • Page 16: Screen Shot: Camera Control Page

    CCU Scenes: The user has access to the CCU scenes set and stored on the Admin pages. There are three (3) user definable presets and six (6) presets preconfigured by the technical folks at Vaddio (really Scott set them all) that are meant to be used in certain lighting scenarios.

  • Page 17: Screen Shot: Storing Presets

    RoboSHOT HD Cameras Screen Shot: Storing Presets ➊ ➋ ➌ ➍ 1) Store Preset: When the Store Preset button is clicked (point 6 on previous page), the Store Preset dialog pops into existence. To save the current camera shot, click one of the Preset buttons (1 through 12), the button will be highlighted and the dialog box will present the Tri-Sync controls and if the CCU setting are to be kept with the preset.

  • Page 18: Screen Shot: Admin Login From The Camera Control Page

    RoboSHOT HD Cameras Screen Shot: Admin login from the Camera Control Page On the security page, which will be reviewed at a bit later in the tour, allows the Admin to set the system to allow automatic guest access to the main camera control page. If guest access is turned on by the Admin, then system will open to the camera control page and an additional Admin Login is provided.

  • Page 19: Screen Shot: Admin Menu - Camera Settings

    RoboSHOT HD Cameras Screen Shot: Admin Menu - Camera Settings Once the Admin logs in, then all the admin menu buttons appear on the left side of the screen. The first menu after Camera Controls is Camera Settings. ➊ ➋ ➌...

  • Page 20: Screen Shot: Admin Menu - Room Labels

    RoboSHOT HD Cameras  Iris: Move adjustment slider as required to adjust the iris opening. A numeric value will be displayed in the box to the right of the slider.  Gain: Move adjustment slider as required for amount of iris gain desired. Numeric value will be displayed in the box to the right of the slider.

  • Page 21: Screen Shot: Admin Menu - Dhcp Network Configuration

    RoboSHOT HD Cameras Screen Shot: Admin Menu - DHCP Network Configuration Under the Networking menu, The Network Configuration and Network Interfaces are displayed. This is where the Network administrator assigns either DHCP or a Static address and the associated parameters. Notes: If the LAN has a DHCP (dynamic host configuration protocol) server, then the IP address, gateway and routing information will automatically be assigned.

  • Page 22: Screen Shot: Admin Menu - Security

    An Admin Login is provided on the camera control page if the “Allow Guest Access” box is checked. Screen Shot: Admin Menu - Diagnostics Diagnostics menu button will display a set of self-diagnostics. These diagnostics may help the Vaddio technical support team diagnose a problem with the RoboSHOT camera...

  • Page 23: Screen Shot: Admin Menu - System

    RoboSHOT HD Cameras Screen Shot: Admin Menu - System The System Menu is where the System Info is displayed and Firmware Updates are performed. There will be firmware updates and upgrades over the life of the camera. The file for the firmware update is chosen in this menu and the update is started here too.

  • Page 24: Screen Shot: Admin Menu - Update Confirmation

    After choosing an update file and clicking on “Begin Firmware Update…” a confirmation pop-up and warning will be displayed. Please contact Vaddio Tech support for assistance with updates. Please read and completely understand the pop-up warnings as it is easy to lose patience waiting for updates. Click on continue to start the update.

  • Page 25: Screen Shot - Admin Menu - Help

    System information is listed on support@vaddio.com. TECHNICAL SUPPORT NOTE: Please work with your Network Administrator prior to calling Vaddio for technical support. Please have on-site network personnel initiate tech support calls with Vaddio only. This concludes the RoboSHOT Screen Shot Tour. Please enjoy yourself while reading the rest of this RoboSHOT Camera Manual.

  • Page 26: General Specifications

    Rack Mount Adapter: 998-6000-002 - Holds three (3) Quick-Connect SR Interfaces Specifications and pricing are subject to change without prior notice or obligation. Notes: For dimensional drawings of the products, go to support.vaddio.com and click on drawings. RoboSHOT HD Cameras- Document Number 342-0794 Rev C Page 26 of 44...

  • Page 27: Communication Specification

    8) TXD (to RXD of control source) NOTE: The Vaddio RoboSHOT Control Protocol is similar, but not identical to, the Sony® VISCA™ command set in order to be compatible with several popular control devices. Not all VISCA commands are supported and there are many Vaddio specific commands in the following Command and Inquiry Lists.
  • Page 28 8x 01 04 0B 00 FF Iris Setting 8x 01 04 0B 01 FF pq=Iris Position** Down 8x 01 04 0B 02 FF RoboSHOT 12 (0h, 07h-11h) Direct 8x 01 04 4B 00 00 0p 0q FF RoboSHOT 30 (0h, 05h-11h) CAM_Gain Reset...
  • Page 29 RoboSHOT HD Cameras RoboSHOT Command List (3/3) Command Set Command Command Packet Comments Cam_Display 8x 01 04 15 02 FF Display On/Off On(alternate) 8x 01 06 06 02 FF 8x 01 04 15 03 FF Off(alternate) 8x 01 06 06 03 FF On/Off 8x 01 04 15 10 FF On/Off(alternate)
  • Page 30 RoboSHOT HD Cameras RoboSHOT Inquiry List (1/2) Inquiry Command Command Response Packet Comments CAM_PowerInq 8x 09 04 00 FF y0 50 02 FF y0 50 03 FF Off (Standby) CAM_ZoomPosInq 8x 09 04 47 FF y0 50 0p 0q 0r 0s FF pqrs: Zoom Position CAM_FocusModeInq 8x 09 04 38 FF...
  • Page 31 RoboSHOT HD Cameras RoboSHOT Inquiry List (2/2) Inquiry Command Command Response Packet Comments CAM_LR_ReverseModeInq 8x 09 04 61 FF y0 50 02 FF On (mirror) y0 50 03 FF CAM_FreezeModeInq 8x 09 04 62 FF y0 50 02 FF y0 50 03 FF CAM_PictureEffectModeInq 8x 09 04 63 FF y0 50 00 FF...

  • Page 32: Command Setting Values

    RoboSHOT HD Cameras OMMAND ETTING ALUES Exposure Control Iris Value Steps Shutter Value 60/59.94/30/29.97 50/25 Gain 0x0F Speed 0x15 1/10000 1/10000 0x0E 0x14 1/6000 1/6000 0x0D 0x13 1/4000 1/3500 0x0C 0x12 1/3000 1/2500 0x0B 0x11 1/2000 1/1750 0x0A 0x10 1/1500 1/1250 0x09 0x0F...

  • Page 33: Telnet Serial Command Api

    ERIAL OMMAND The Vaddio Serial Command protocol is a high level text based command line interface supported via telnet session on the RoboSHOT. The command application protocol interface is intended to allow external device such as AMX or Crestron to control the camera. The protocol is based upon ASCII format following the VT100 terminal emulation standard and uses an intuitive text command nomenclature for ease of use.
  • Page 34 RoboSHOT HD Cameras Camera Preset  NAME camera preset - Recall and storing of camera presets  SYNOPSIS camera preset {recall|store} [1-6]  DESCRIPTION Method used to recall and store camera presets  OPTIONS recall Recall preset store Store preset preset Required value from 1-6 used to indicate the preset number ...
  • Page 35 RoboSHOT HD Cameras Camera  NAME camera - Base command for camera control command. Used in conjunction with control arguments to include home, pan, tilt, zoom, preset etc...  SYNOPSIS camera {ccu|home|pan|preset|standby|tilt|zoom}  DESCRIPTION The camera command is the base command used to control the camera movement ...
  • Page 36 RoboSHOT Camera Systems CCU Camera Scene  NAME camera ccu scene - Stores or recalls the ccu scene  SYNOPSIS camera ccu scene {recall {factory [1-6]|custom [1-3]} | store [1-3]}  DESCRIPTION Method used to get or set the ccu scene  OPTIONS recall Recalls a ccu scene...
  • Page 37 RoboSHOT Camera Systems Camera CCU  NAME camera ccu - Stores and recalls scenes and gets and sets CCU settings  SYNOPSIS camera ccu  DESCRIPTION Method used to get or set the ccu scene or ccu setting  OPTIONS scene Used for storing/recalling scenes Used for getting CCU settings Used for setting CCU settings...
  • Page 38 RoboSHOT Camera Systems Exit  NAME exit - ends the current API command session  SYNOPSIS exit  DESCRIPTION Exit ends the current API command session. If the session is over telnet, the session is ended and the socket is closed. If the session is over serial, a new session is started.
  • Page 39 RoboSHOT Camera Systems Network Settings  NAME network settings - get current network settings  SYNOPSIS network settings {get}  DESCRIPTION Method used to get the current network settings of the device  OPTIONS get Get the current network settings for the machine ...
  • Page 40 RoboSHOT Camera Systems System Factory‐Reset  NAME system factory-reset - Gets or sets factory reset status  SYNOPSIS system factory-reset {get|on|off}  DESCRIPTION Method used to get or set the factory reset status  OPTIONS Get the current factory reset status Enable factory reset on reboot Disable factory reset on reboot ...
  • Page 41 RoboSHOT Camera Systems System  NAME system - gets or Sets the Current System Settings  SYNOPSIS system {factory-reset {get|on|off} | reboot [ <seconds>]}  DESCRIPTION Method used to get/set the current system settings or execute system commands  OPTIONS factory-reset Get or set the factory reset status reboot Reboot the system...

  • Page 42: Compliance And Ce Declaration Of Conformity - Roboshot Hd Ptz Cameras

    Operation is subject to the following two conditions: (1) This device may not cause interference, and (2) This device must accept any interference including interference that may cause undesired operation of the device. Changes or modifications not expressly approved by Vaddio can affect emission compliance and could void the user’s authority to operate this equipment.

  • Page 43: Warranty Information

    Vaddio Customer Service: Vaddio will test, repair, or replace the product or products without charge if the unit is under warranty. If the product is out of warranty, Vaddio will test then repair the product or products. The cost of parts and labor charge will be estimated by a technician and confirmed by the customer prior to repair.
  • Page 44 ©2015 Vaddio - All Rights Reserved. Reproduction in whole or in part without written permission is prohibited. Specifications and pricing are subject to change without notice or obligation. Vaddio, RoboSHOT, ProductionVIEW, EZCamera, Quick-Connect and HSDS are trademarks of Vaddio. All other trademarks are property of...

This manual is also suitable for:

RoboshotRoboshot 30

Table of Contents