Table of Contents
Advertisement
Connecting the power lead
2
Plug the power lead into a 220-240 V, 50/60 Hz, earthed (2 or
3-prong) AC outlet.
• When disconnecting the fax, unplug the telephone line cord
before unplugging the power lead.
• Caution! The mains outlet (socket outlet) should be installed
near the equipment and be easily accessable.
For GR/GH/TH
For MY
The machine does not have a
power on/off switch, so the
power is turned on and off by
simply plugging in or
unplugging the power lead.
• Note: If your area experieces a high incidence of lightning or
power surges, we recommend that you install surge protectors
for the power and telephone lines. Surge protectors can be
purchased at your dealer or most telephone specialty stores.
Connecting the telephone line cord
3
Insert one end of the line cord into the jack on the left of the
machine marked TEL. LINE. Insert the other end into a standard
(RJ11C) single-line wall telephone jack.
• Note: Your fax is set for tone dialling. If you are on a pulse dial
line, you must set your fax for pulse dialling. Press the keys on
the operation panel as follows:
1) Press these keys.
[GR/GH]
FUNCTION
4
[MY/TH]
FUNCTION
4
The display will show:
DIAL MODE
1=TONE, 2=PULSE
Be sure to insert the
line into the TEL. LINE
socket. Do not insert it
into the TEL. SET
socket.
2) Press 1 to select tone dialling, or 2 to select pulse dialling.
TONE
3) Press the STOP key to return to the date and time display.
Attaching the paper tray and document supports
4
1) Attach the paper tray.
2) Attach the received document tray.
3) Attach the original document support.
• Make sure the front side of the support faces you (the support
should curve slightly toward you).
Extension phone (optional)
5
If desired, you can connect an extension phone to the TEL. SET
socket on the fax.
1) Remove the seal covering the TEL. SET socket.
1 – 7
FO-2950MGR/GH/MY/TH
PULSE
1
2
or
STOP
Advertisement
Chapters
Table of Contents
Troubleshooting
