Table of Contents
Advertisement
BARCODE SCANNING FEATURES
5 BARCODE SCANNING FEATURES
This chapter provides details on how the DS8110 Barcode Scanning System functions during
normal operation. It also helps familiarize the user with status indicator LEDs, Control Panel
operation, system setup, and how the scanners can be easily and quickly replaced with a
new unit if necessary.
IMPORTANT: The procedures outlined in this chapter should only be
performed by a Datalogic trained technician.
For further information on training, contact us through the Datalogic
website at www.datalogic.com.
5.1 FIRST-TIME STARTUP
NOTE: Before starting up or testing the scanner, it must be connected to
a CBX510 Connection Box or an SC5000 Controller depending on the
system configuration.
On initial power-up, the DS8110 performs a series of self-diagnostic and LED
tests. The complete power-up sequence takes about 20 seconds. When the READY LED
flashes and turns a steady green the power-up sequence is complete, and the scanner is
operational.
5.1.1 Default Parameters
The barcode scanners are shipped from the factory with these defaults:
Default Password: DLA
Control Panel Buttons Enabled
Code 128 (10-30 characters), Code 39
IP address HOST 172.27.101.220; Setup 192.168.3.100
Perform the following setup procedure using these defaults or configure your
Barcode scanner with your application's parameters using the User Interface.
5.1.2 Check Operations using Test Mode
NOTE: Perform the following test using a bar code that matches the
default parameters. A barcode test chart is included in the box with each
scanner, and a code from the chart can be used to perform the test
If the default parameters have been changed, you must enable the
control panel buttons and the other default parameters listed.
To quickly check DS8110 operation:
1. Make sure the scanner is connected to a CBX510 or SC5000.
2. Apply power to the reader.
3. Press and hold the X-Press button until the first two red LEDs light, and then release the
button.
5
161
- Quick Links:
- Getting Started
Hide quick links:
Advertisement
Table of Contents
