free hit counter

Error Codes And Resolutions - Datalogic DS8110 Reference Manual

Barcode scanner
Hide thumbs Also See for DS8110:
Table of Contents

Advertisement

7

7.1 ERROR CODES AND RESOLUTIONS

Error
Description
Severity
Code
1
Node not
Error
responding
80
Node Reset
Error
81
Motor
Error
Failure
83
Laser Failure
Error
230
Explanation
In a Master/Slave
- The scanning
configuration, the
tunnel's no-read
Master monitors the
rate increases.
status of the Slaves
in its network. If a
- More than one
slave unit fails to be
slave unit may
identified, the
be shown as not
Master will post this
responding.
message.
In a Master/Slave
- The scanning
configuration, the
tunnel's no-read
Master monitors the
rate may
status of the Slaves
increase during
in its network. If a
the Slave
Slave resets, it sends
scanner's
a reset message to
reconnection.
the Master. The
Master then posts
this error condition
on the diagnostic
screen.
The scanner's mirror
- The scanner will
wheel motor has
be powered up
failed.
but will not emit
laser light from
its exit window.
- The scanners
motor will not
be spinning.
Scanner has a laser
- There is no laser
failure.
light emitted
from the
scanner
- The mirror wheel
motor may still
be spinning,
however, the
motor speed
may be out of
range at which
time the scanner
will turn off the
laser light.
DS8110 REFERENCE MANUAL
Symptom
Troubleshooting
- In a tunnel
configuration,
the cabling that
connects the
system into to a
network must
be intact or a
scanner will be
reported as not
responding.
- Make sure all the
slave units are
powered on.
- This condition is
related to a
slave scanner.
Make sure the
power source of
the slave is not
faulty.
- Hold your hand
in front of the
scanner to
determine if the
laser is on.
- Hold your hand
in front of the
scanner to
determine if the
laser is on.
Action required
- Make sure cables
are connected.
- Check scanners
power source.
- Replace scanner.
- If condition
persists, replace
the scanner.
This is an internal
failure and is not
field serviceable
- Replace scanner.
This is an internal
failure and is not
field serviceable.
- Replace scanner.

Hide quick links:

Advertisement

Table of Contents
loading