Confirmation Of Firmware Version And Checksum - Yamaha RX-V1700 Service Manual
Av receiver/av amplifier
Hide thumbs
Also See for RX-V1700:
- Owner's manual (791 pages) ,
- Firmware update manual (3 pages) ,
- Owner's manual (151 pages)
Table of Contents
Advertisement
2. Reconnect the power cable of main unit to the AC
outlet.
3. Reconnect the power cable of DVD/CD player to
the AC outlet.
4. Press the "MASTER ON/OFF" key of the main unit
while simultaneously pressing the "STRAIGHT"
key of the main unit.
Then the ADVANCED SETUP mode is activated.
(Fig. 2)
"MASTER ON / OFF" Key
"MASTER ON / OFF"
ADVANCED SETUP mode
ADVANCED SETUP
USER PRESET
Fig. 2
5. Keep pressing the "NIGHT" key for about 3 sec-
onds. (Fig. 2)
CDDA Upgrader 1700 is displayed. (Fig. 2)
6. Press the "STANDBY/ON" key of the DVD/CD
player.
7. Press the "EJECT" key of the DVD/CD player to
open the tray.
8. Put the firmware CD on the tray and close the tray.
9. Press the "PLAY" key of the DVD/CD player.
Then writing of the firmware is started.
10. When writing of the firmware is completed, "Update
Success Please MASTER Off!" is displayed.
*
If "Update Success Please MASTER Off!" is not
displayed or "Errorxxx" appears before coming
to the end, perform Steps 5 to 10 of "Operation
Procedures" again.
Writing is started. /
Found Header
Fig. 3
"STRAIGHT" Key
"NIGHT" Key
"STRAIGHT"
"NIGHT"
CDDA Upgrader
CANCEL
1700
Keep pressing the "NIGHT" key for about 3 seconds.
Writing is completed. /
Update Success
Please MASTER Off!
11. Press the "STOP" key of the DVD/CD player.
12. Press the "EJECT" key of the DVD/CD player to
open the tray.
13. Remove the firmware CD from the tray and close
the tray.
14. Turn off the power of the DVD/CD player and dis-
connect the power cord from the AC outlet.
15. Turn off the power of main unit and disconnect the
power cable from the AC outlet.
G Confirmation of firmware version and checksum
Confirm that the firmware is updated successfully with
the DIAG function.
For more information, refer to "SELF DIAGNOSIS FUNC-
TION".
1. Version of MAIN (DIAG 29-1)
2. Checksum of MAIN (DIAG 29-2)
3. Version of VIDEO (DIAG 29-3)
4. Checksum of VIDEO (DIAG 29-4, 29-5)
5. Version of TI (DSP) (DIAG 29-6)
6. Checksum of TI (DSP) (DIAG 29-7)
*
When the displayed firmware version and checksum
are different from written firmware version and
checksum, follow the steps from 1 to 15 of "Opera-
tion Procedures" again.
RX-V1700/DSP-AX1700
19
Hide quick links:
Advertisement
Table of Contents
