Sony PDW-F800 Operation Manual page 186
Professional disc camcorder
Hide thumbs
Also See for PDW-F800:
- Operation manual (318 pages) ,
- Brochure & specs (4 pages) ,
- Maintenance manual (300 pages)
Table of Contents
Advertisement
No.
Page
16/17 DCC
ADJUST
17/18 AUTO IRIS
2
18/19 GENLOCK GENLOCK
19/20 ND COMP
186
Menu List
Item
Settings
DCC FUNCTION
DCC/FIX
SEL
DCC D RANGE
400%/450%/
500%/550%/
600%
DCC POINT
(–99 to 99)
DCC GAIN
(–99 to 99)
DCC DELAY
(–99 to 99)
TIME
DCC PEAK
(–99 to 99)
FILTER
IRIS WINDOW
1/2/3/4/5/6/VAR Selects the auto iris detection window.
IRIS WINDOW
OFF/ON
IND
IRIS LEVEL
(–99 to 99)
IRIS APL RATIO (–99 to 99)
IRIS VAR WIDTH 20 to 240 to 479 Adjusts the width of detection frame when the
IRIS VAR
20 to 135 to 269 Adjusts the height of detection frame when the
HEIGHT
IRIS VAR H POS –460 to 0 to 459 Adjusts the horizontal position of detection frame
IRIS VAR V POS –250 to 0 to 249 Adjusts the vertical position of detection frame
IRIS SPEED
(–99 to 99)
CLIP HIGH
OFF/ON
LIGHT
OFF/ON
GL HD H PHASE (–99 to 99)
GL SD H PHASE (–99 to 99)
REFERENCE
INTERNAL/
GENLOCK/
SDI IN
ND OFFSET
OFF/ON
ADJUST
CLEAR ND
EXEC
OFFSET
Description
Enables or disables automatic knee point
adjustment when the OUTPUT/DCC switch is set
to CAM, DCC: ON.
DCC: Automatically adjust the knee point
according to the luminance of the subject.
FIX: Set the knee point to a fixed value.
Sets the dynamic range when the OUTPUT/DCC
switch is set to CAM, DCC: ON.
Adjusts the DCC minimum knee point.
Adjusts the gain to DCC detected value.
Adjusts the DCC reaction speed.
Adjusts the response sensitivity to the peak of the
DCC detected value.
VAR: variable
Turns on and off the function which displays a
frame marker for the auto iris detection window.
Adjusts the level of the auto iris target value.
Adjusts the mix ratio of auto iris detection peak
value and average value.
auto iris detection window is set to VAR.
auto iris detection window is set to VAR.
when the auto iris detection window is set to VAR.
when the auto iris detection window is set to VAR.
Adjusts the auto iris speed.
Turns on and off the function which, during auto
iris adjustment, ignores very bright areas by
dulling the reaction to high luminescence.
Turns genlock on and off.
Sets the HD output H phase for genlock operation.
Sets the SD output H phase for genlock operation.
Displays the type of reference signal used by this
unit.
Turns on and off the mode which sets ND (neutral
density) filter color compensation values.
Clear ND filter color compensation values.
Advertisement
Table of Contents
