Sony PDW-F800 Operation Manual page 188
Professional disc camcorder
Hide thumbs
Also See for PDW-F800:
- Operation manual (318 pages) ,
- Brochure & specs (4 pages) ,
- Maintenance manual (300 pages)
Table of Contents
Advertisement
No.
Page
22/23 NETWORK DHCP
23/24 UP
CONVERT
ER
188
Menu List
Item
Settings
ENABLE/
DISABLE
IP ADDRESS
xxx.xxx.xxx.xxx
192.168.1.10
SUBNET MASK
xxx.xxx.xxx.xxx
255.255.255.0
DEF.GATEWAY
xxx.xxx.xxx.xxx
0.0.0.0
LINK SPEED
AUTO/10Mbps/
100Mbps
DUPLEX
AUTO/FULL/
HALF
DNS1
xxx.xxx.xxx.xxx
0.0.0.0
DNS2
xxx.xxx.xxx.xxx
0.0.0.0
UPnP
DISABLE/
ENABL
NET CFG RESET EXEC
UP CON
FIELD/ADPT
PROCESS
UC DETAIL
(–99 to 99)
LEVEL
UC CRISPENING (–8 to 7)
UC DETAIL
(–99 to 99)
LIMIT
UC LV DEPEND
(–8 to 7)
LVL
UC DTL
3.2M/4.5M/
FREQUENCY
5.0M/4.0M
UC DTL H/V
(–3 to 4)
RATIO
Description
Selects whether to enable automatic acquisition of
the IP address from a DHCP server.
Notes
• IP address, subnet mask, default gateway, and DNS
server 1 and 2 cannot be set when DHCP is set to
"ENABLE".
• To check automatically acquired settings, close the
menu and open it again.
Set the IP address of this unit.
Sets the subnet mask.
Set the address of the default gateway.
Sets the communications speed.
Sets the duplex mode.
Set the address of DNS server 1.
Set the address of DNS server 2.
Select whether to enable the UPnP (universal plug
and play) function.
DISABLE: Disable the UPnP function.
ENABLE: Enable the UPnP function.
Reset network settings to the factory defaults.
Selects the conversion source picture when SD is
upconverted to HD.
FIELD: Use the field picture.
ADPT: Optimize the ratio of conversion from the
frame or field picture.
Adjusts the sharpness of edge enhancement by the
upconverter.
Sets the amplitude width at which the upconverter
does not emphasize low-amplitude signals.
Sets the maximum level of edge enhancement by
the upconverter.
Sets the luminance of edge enhancement by the
upconverter.
Sets the center frequency and frequency
properties of edge enhancement by the
upconverter.
3.2M: 3.2 ± 1.1 MHz
4.5M: 4.5 ± 1.4 MHz
5.0M: 5.0 ± 0.7 MHz
4.0M: 4.0 ± 2.0 MHz
Sets the horizontal/vertical ratio of edge
enhancement by the upconverter.
Advertisement
Table of Contents
