Table of Contents
Advertisement
12
DISASSEMBLY INSTRUCTIONS
<"Terminal with lock mechanism" Detaching points>
In case of terminal with lock mechanism, detach the terminal as shown below.
There are two types ( Refer to (1) and (2)) of the terminal with lock mechanism.
The terminal with no lock mechanism can be removed by pulling it out.
Check the shape of the terminal and work.
(1) Slide the sleeve and check if there is a locking lever or not.
Sleeve
Locking lever
MUH-A07YV -
MUH-A09YV -
E1
OUTDOOR UNIT
OPERATING PROCEDURE
1. Removing the cabinet
(1) Remove the screws of the top panel.
(2) Remove the screw of the service panel.
(3) Remove the screws of the cabinet.
(4) Remove the screws of the front panel and motor support.
(5) Remove the service panel, and remove the screw from
the insides.
(6) Remove the top panel.
(7) Remove the cabinet.
Photo 3
Screws of the
service panel
1Slide the sleeve.
2Pull the terminal while
pushing the locking
lever.
MUH-A12YV -
E1
Screws of
the top panel
Service
panel
29
(2) The terminal with this connector is a terminal
with lock mechanism
1Hold the sleeve, and
pull out the terminal
slowly.
Connector
E1
PHOTOS
Photo 1
Screws of the front panel and motor support
Screws
of the
cabinet
Screws of the cabinet
Photo 2
Screw of the
top panel
Screws of the
cabinet
Hide quick links:
Advertisement
Table of Contents
