3.4 C ..................18 ONNECT ABLES 3.4.1 Connect the Video Source and iVW-FH233 ..........18 3.4.2 Connect iVW-FH233 and the Display Devices .......... 18 3.4.3 Connect the Power Adapter to iVW-FH233 ..........19 4. Input and Output Resolution ................ 20 4.1 A...
User Manual Legal Notice and Disclaimer This user manual provides a description of the iVW Video Wall Controller’s hardware and relevant guidelines for key functions. Please read this document carefully and adhere to its instructions. This manual provides the description of all the functions of the iVW Video Wall Controller.
Page 6
Note: 1. Back up your system periodically to avoid any potential data loss. 2. Should you return any components of the iVW-FH233 package for refund or maintenance, make sure they are carefully packed for shipping. Any form of damage caused by improper packaging will not be compensated.
User Manual Regulatory Notice FCC Notice FCC Class A Notice This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: This device may not cause harmful interference. This device must accept any interference received, including interference that may cause undesired operation.
Page 9
User Manual Symbols in this document This icon indicates instructions that must be strictly followed. Failure to do so may result in injury or death. Warning This icon indicates the action may lead to disk clearance/loss OR failure to follow the instructions could result in data damage, disk Caution damage, or product damage.
User Manual Safety Warnings The iVW video wall controller can operate normally in a temperature between 0ºC–40ºC and in a relative humidity of 0%–95%. Please ensure the operating environment is well-ventilated. The power cord and devices connected to the iVW video wall controller must provide a correct supply voltage (100W, 90–264V).
1.1 Introduction Figure 1-1: iVW-FH233 The iVW-FH233 video wall controller box is for displaying a single video input on an array video wall controller box is for displaying a single video input on an array video wall controller box is for displaying a single video input on an array...
Page 12
User Manual 2, 2 x 3, 3 x 2, 3 x 3) HDCP support for compliance with Blu-ray Disc players and video game consoles • Genimask bezel compensation technology for compensating for gaps between • monitors RS232 for firmware upgrade and system integration •...
Six OSD buttons • One Infrared sensor One Infrared sensor • Figure 2-1: iVW-FH233 Front Panel Front Panel 2.2 Rear Panel The rear panel has the following connectors and switches: The rear panel has the following connectors and switches: One HDMI input •...
FH233 User Manual FH233 User Manual Figure 2-2: iVW-FH233 Rear Panel Rear Panel 2.3 Technical Specifications Technical Specifications Specification Description Model iVW-FH233 Multipl e output resolution support e output resolution support • Multiple display mode support • Main Features...
Width: 295 mm • Depth: 191 mm • Figure 2-3: iVW-FH233 Dimensions 2.5 Power Switch and Reset Behavior Toggle the power switch to turn on or turn off the video wall controller. Power switch Power switch (Turn on) (Turn off)
To reset the device, press and hold the "Up" OSD button while toggling the power switch to start the iVW-FH233. Hold the "Up" OSD button until the power LED flashes orange then release it. The power LED will stop flashing orange when the reset process is done.
Keep all vertical gaps between monitors in the array consistent • 3.3 Mounting The iVW-FH233 must be placed on a table, desk or any other firm surface. The iVW-FH233 can also be mounted using the included mounting brackets. The installation location must be: Out of direct sunlight •...
(PC, console, player, etc) to the • iVW-FH233. HDMI output cables output cables – from the iVW-FH233 to the LCD panels or other video box to the LCD panels or other video box • controllers. Make sure the cables are connected to the correct monitors controllers.
Is the maximum possible resolution (without exceeding input resolution limits) • The iVW-FH233 supports the following input resolutions. 640 x 480, 720 x 480 (480p), 800 x 600, 1024 x 768, 1152 x 864, 1280 x 720 (720p), 1280 x 800, 1280 x 960, 1280 x 1024, 1360 x 768, 1366 x 768, 1440 x 900, 1600 x 1200, 1680 x 1050, 1920 x 1080 (1080p) 4.3 Output Resolution...
iVW- FH233 User Manual FH233 User Manual Functions Functions OSD Menu ). The modes are shown in Figure 5-1 below. below. Figure 5-1: Display Mode Display Mode Note: 1. The 2 x 3 and 3 x 2 display display modes retain the original aspect ratio of the original aspect ratio of the output resolution for the best visual experience.
iVW- FH233 User Manual FH233 User Manual Figure 5-2: 3 x 3 D isplay isplay Mode Setup 5.2 2 x 2 Display Mode 2 x 2 Display Mode The 2 x 2 display mode splits the video source and splits the video source and outputs it across 4 display devices. it across 4 display devices.
Page 24
iVW- FH233 User Manual FH233 User Manual Figure 5-4: 1 x 1 D isplay isplay Mode Setup 5.4 3 x 2 Display Mode 3 x 2 Display Mode The 3 x 2 display mode splits th splits th e video source and outputs it across 6 6 display devices.
iVW- FH233 User Manual FH233 User Manual 5.5 2 x 3 Display Mode 2 x 3 Display Mode The 2 x 3 display mode splits the video source and splits the video source and outputs it across 6 6 display devices. The implementation of a 2 x 2 x 3 (for 6 displays) array is shown below.
User Manual 6. OSD Menu Functions iVW-FH233 provides an On-Screen-Display (OSD) menu that enables you to easily make adjustments to your settings. 6.1 OSD Buttons There are several OSD control buttons on the iVW-FH233 front panel. Menu: • Enters the OSD, selects items and confirms new values.
EDID Version Table 6-1: OSD Menu Structure 6.3 Output Resolution Menu For the best visual experience, users can change the output resolution of iVW-FH233 to fit the display's native resolution. The output resolutions available are listed below. 1024 x 768 •...
User Manual Figure 6-2: Output Resolution Menu 6.4 Display Mode Menu iVW-FH233 supports several video wall array display modes. The supported display modes are listed below. 3 x 3 (default) • The video input is split across all 9 displays in a 3 x 3 array.
User Manual 6.5 Bezel Compensation Menu When using displays with noticeable bezels, Bezel Compensation can be used for greater image alignment. To find out the approximate value for each bezel compensation setting, please refer to the formulas below Bezel compensation value for bezels at left/right side •...
User Manual 6.6 System Option Menu The System Option menu is shown in Figure 6-5, please follow the instructions at the bottom of the OSD menu to use it. Figure 6-5: System Option Menu The OSD position can be adjusted by using the OSD Position menu as shown in Figure...
User Manual Figure 6-6: OSD Position Window 6.7 System Information Menu The system information menu shows the input resolution, output resolution, and firmware/OSD/EDID version. The System Option menu is shown in Figure 6-7.
Figure 6-7: System Information Menu 6.8 Remote Control The iVW-FH233 comes with a remote control for easier control without approaching the device. Figure 6-8 shows the remote controller and its function keys. Power: Starts the iVW-FH233 or puts it in standby.
User Manual 7. Technical Support We provide dedicated online support and customer service. Please contact the following if you require technical support.