Table of Contents
Advertisement
10. Disconnect the power cable of this unit from the
AC outlet.
11. Disconnect the RS232C cross cable, RS232C
conversion adapter and flexible flat cable.
•
Initializing of this unit
*
After updating the firmware, be sure to initialize
this unit.
1. Connect the power cable of this unit to the AC
outlet.
2. Press the "MAIN ZONE ON/OFF" (RX-V863 / HTR-
6180: U, F models) / "STANDBY/ON" (HTR-6180: C
model / DSP-AX863SE) key while simultaneously
pressing the "STRAIGHT" and "AUDIO SELECT"
keys. (Fig. 4)
Then the self-diagnostic function is activated.
3. Select the self-diagnostic function menu "23.
FACTORY PRESET".
4. Select the "PRESET RSRV".
"MAIN ZONE ON/OFF" key
(RX-V863 / HTR-6180: U, F models)
"STANDBY/ON" key
(HTR-6180: C model /
DSP-AX863SE / DSP-AX863)
PRESET INHIBIT (Initialization inhibited) /
23.PRESET INHI
•
Confirmation of firmware version and checksum
To confirm that the firmware is updated successfully,
check the firmware version and checksum value by
using the self-diagnostic function.
For more information, refer to "SELF-DIAGNOSTIC
FUNCTION".
"STRAIGHT" key
"AUDIO SELECT" key
Fig. 4
RX-V863/HTR-6180/DSP-AX863SE/DSP-AX863
PRESET RESERVED (Initialization reserved) /
23.PRESET RSRV
29
Hide quick links:
Advertisement
Table of Contents
