Table of Contents
Advertisement
press the multifunction key when the
headset is connected to a mobile
device. If the indicator light is green,
the charge level is sufficient. If the
light is yellow, you may need to
recharge the battery soon. If the light
is red, recharge the battery.
When the battery charge is low, the
headset beeps every 5 minutes and
the red indicator light flashes.
Switch the headset on
To switch on, press the multifunction
key. If your device supports the Near
Field Communication (NFC) feature,
make sure the feature is activated in
the device, and touch the NFC area of
the device with the NFC area of the
headset. For details on NFC, see the
user guide of your device.
The headset beeps, and the green
indicator light flashes slowly while the
headset tries to connect to one or two
last connected devices.
When the headset is connected to at
least one device and is ready for use,
the blue indicator light flashes slowly.
If the headset has not been paired
with a device, it automatically enters
pairing mode.
Switch the headset off
To switch off, press and hold the
multifunction key for about 5 seconds.
The headset beeps, and the red
indicator light is briefly displayed.
If the headset is not connected to a
device within about 30 minutes, it
switches off automatically.
Pair and connect the headset
Before using the headset, you must
pair and connect it to a compatible
device.
You can pair the headset with up to
eight devices, but you can connect it
ENGLISH
Advertisement
Table of Contents
