Replacing the SCSI Cable
1. Remove the right and rear access panels (refer to "Removing the
Right, Left, and Rear Access Panels" on page 5).
2. Remove the SCSI cable from the interface PCA.
Do Steps 2 and 3 of "Replacing the Interface PCA" on page 52.
Remove only the SCSI cable on the bottom of the interface PCA.
3. Remove the SCSI cable from the controller PCA.
Do Steps 2 to 4 of "Replacing the Controller PCA" on page 50 to
remove the controller PCA. Remove the SCSI cable from underneath
the controller PCA.
Chapter 5
Removal and Replacement
Replacing the SCSI Cable
5-55