Table of Contents
Advertisement
Note: The screws that secure the disk drive to the disk drive cage are special
11. Remove the disk drive from the disk drive cage.
Shoulder
Shoulder
Screw
Screw
Installing Disk Drives
Notes:
1. If you are installing a disk drive in the media bay, go to "Installing an Optional Disk
Drive" on page 48.
2. SCSI drives must have their SCSI address set manually. Refer to the
documentation provided with your disk drive for more information on setting the
SCSI address. Refer to "SCSI IDs and Bay Component Locations" in the RS/6000
44P Series Model 170 Service Guide , order number SA38-0560 for more
information on SCSI addresses in your system unit.
1. Follow steps 2 through 7 of "Disk Drives" on page 42.
2. Remove or put any termination jumpers in the inactive position.
3. With one hand, touch any metal surface of the chassis to minimize static electric
discharge.
4. Insert the disk drive into the disk drive cage.
shoulder screws, with blue grommets. Failure to use the blue grommets and
shoulder screws can result in permanent damage to the disk drive.
Blue Grommet
Blue Grommet
Disk Drive Cage
Disk Drive Cage
Retaining Screw
Retaining Screw
Disk Drive
Disk Drive
Disk Drive Cage
Disk Drive Cage
Retaining Screw
Retaining Screw
Chapter 3. Installing Options for the RS/6000 44P Series Model 170
43
- Quick Links:
- Removing the Left Side Cover
Hide quick links:
Advertisement
Table of Contents
