Harman Accentra Installation & Operating Manual page 10

Table of Contents

When installing and operating your Harman® Accentra Pellet Stove, respect basic safety standards. Read these instructions

carefully before you attempt to install or operate the Accentra. Failure to do so may result in damage to property or personal

injury and may void the product warranty.

Several issues must be addressed when selecting a suitable location for your Accentra Pellet Stove. Observing required

clearances to combustible materials, the proximity to a safe chimney or venting system, and the accessibility of electrical

supply must all be considered.

Place the stove away from combustible walls at least as far as shown in figures 10, 11, & 13.

Clearances may Only be reduced using methods Approved by the regulating Authority having jurisdiction.

Note that the clearances shown are minimum for safety but do not leave much room for access when cleaning or service

is needed.

Alternate floor protector dimension may be used as long as they satisfy the

measurement requirements shown below.

Minumum size floor protection for a corner installation hearth pad is 24

x 28

The Clearance to The Top of The Unit is 60" (152cm) Measured From The

Floor.

3-90-08326R25_06/13

5/8

2.25"

57mm

Fig.11

305mm

This is the minimum size Harman® recommends for an

alcove with a 60" ceiling.

14.75"

2.25"

6.25"

159mm

12"

14.75"

54"

1/16

5" min.

Fig. 13

Table of Contents

Show Quick Links

Table of Contents