Miele KM 6322 Operating And Installation Instructions
Ceramic cooktops with induction
Hide thumbs
Also See for KM 6322:
- Operating and installation instruction (80 pages) ,
- Operating and installation instructions (72 pages) ,
- Operating and installation instructions (76 pages)
Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for Miele KM 6322
Summary of Contents for Miele KM 6322
- Page 1 Operating and installation instructions Ceramic cooktops with induction To avoid the risk of accidents or damage to the appliance, it is essential to read these instructions before it is installed and used for the first time. en - AU, NZ M.-Nr.
-
Page 2: Table Of Contents
KM 6322 / KM 6323 ........ - Page 3 Con|ctivity and Miele|home ........
-
Page 4: Warning And Safety Instructions
They contain important notes on installation, safety, use and maintenance. Miele cannot be held liable for damage caused by non-compliance with these Warning and Safety instructions. - Page 5 Warning and Safety instructions Correct application This cooktop is designed for domestic use and for use in similar environments by guests in hotel or motel rooms, bed & breakfasts and other typical living quarters. This does not include common/shared facilities or commercial facilities within hotels, motels or bed &...
- Page 6 Warning and Safety instructions Safety with children Small children must be kept away from the appliance unless they are constantly supervised. Older children may only use the appliance if they have been shown how to use it in a safe way and understand the hazards involved.
- Page 7 Installation, maintenance and repairs by unqualified persons could be dangerous. Miele cannot be held liable for unauthorised work. A damaged appliance can be dangerous. Check the appliance for visible signs of damage.
- Page 8 The manufacturer can only guarantee the safety of the appliance when original Miele replacement parts are used. Faulty components must only be replaced by genuine Miele original spare parts. The cooktop is not intended for use with an external timer switch or a remote control system.
- Page 9 Warning and Safety instructions Danger of electric shock. Do not use the cooktop if it is faulty, or if the ceramic surface is cracked, chipped or damaged in any way. Switch it off immediately, and disconnect it from the mains electricity supply. In areas which may be subject to infestation by cockroaches or other vermin, pay particular attention to keeping the appliance and its surroundings clean at all times.
- Page 10 Warning and Safety instructions Correct use Oil and fat can overheat and catch fire. Do not leave the appliance unattended when cooking with oil or fat. If oil or fat does catch fire, do not attempt to put out the flames with water. Disconnect the appliance from the mains and use a suitable fire blanket, saucepan lid, damp towel or similar to smother the flames.
- Page 11 Warning and Safety instructions If the appliance is installed behind a kitchen furniture door, it may only be used with the furniture door open. Do not close the door whilst the cooktop in use or whilst there is any residual heat present. The appliance gets hot when in use and remains hot for a while after being switched off.
- Page 12 Warning and Safety instructions Do not use pots or pans on the cooktop with bases with pronounced edges or ridges. These could scratch or scour the ceramic glass surface permanently. Only use pots and pans with smooth bases. Grains of salt, sugar and sand (e.g. from cleaning vegetables) can cause scratches if they get under pan bases.
- Page 13 Warning and Safety instructions Metal utensils stored in a drawer under the cooktop can become hot if the induction cooktop is used intensively for a long time. Do not store any metal items or utensils in a drawer under the cooktop This cooktop is fitted with a cooling fan.
-
Page 14: Guide To The Appliance
Guide to the appliance Models KM 6322 / KM 6323 ab Cooking zones with Booster c PowerFlex cooking zone with TwinBooster, can be combined with d to form a PowerFlex cooking area. d PowerFlex cooking zone with TwinBooster e Control panel... - Page 15 Guide to the appliance KM 6347 / KM 6348 ab Cooking zones with Booster c PowerFlex cooking zone with TwinBooster, can be combined with d to form a PowerFlex cooking area. d PowerFlex cooking zone with TwinBooster e Control panel...
-
Page 16: Control Panel
Guide to the appliance Control panel Sensor controls a On/Off b Numerical keypad - For setting the power level - For setting the time c Safety lock d Booster/TwinBooster e For selecting the cooking zone f For switching on the PowerFlex cooking area g - For selecting the timer - For switching between the timer functions - For selecting the switch-off time (see "Switching off a cooking zone... - Page 17 Guide to the appliance Indicator lights i Safety lock j Booster Cooking zone displays = Cooking zone ready for use = Keeping warm function 1 to 9 = Power levels = Level 1 TwinBooster = Booster/TwinBooster level 2 ß = No pan on cooking zone or pan unsuitable (see "Induction") = Residual heat = Auto heat-up when the power level range has been extended...
-
Page 18: Cooking Zones
Guide to the appliance Cooking zones Cooking zone KM 6322 / KM 6323 Minimum to maximum Rating in watts for 230 V** C in cm* 14–20 Normal 1850 Booster 3000 10–16 Normal 1400 Booster 2200 15–23 Normal 2100 TwinBooster level 1... - Page 19 Guide to the appliance Cooking zone KM 6347 / KM 6348 Minimum to maximum Rating in watts for 230 V** C in cm* 16–23 Normal 2300 TwinBooster level 1 3000 TwinBooster level 2 3700 10–16 Normal 1400 Booster 2200 15–23 Normal 2100 TwinBooster level 1...
-
Page 20: Caring For The Environment
Caring for the environment Disposal of the packing Disposing of your old material appliance The transport and protective packing Electrical and electronic appliances has been selected from materials often contain materials which, if which are environmentally friendly for handled or disposed of incorrectly, disposal and should be recycled. -
Page 21: Before Using For The First Time
Before using for the first time Please stick the extra data plate for the appliance supplied with this documentation in the space provided in the "After sales service, data plate, warranty" section of this booklet. Cleaning for the first time ^ Remove any protective wrapping and adhesive labels. -
Page 22: Induction
Induction The induction principle An induction coil is located under each cooking zone. When a cooking zone is switched on, this coil creates a magnetic field which impacts directly on the base of the pan and heats it up. The cooking zone itself is heated up indirectly by the heat given off by the pan. -
Page 23: Noises
Induction Noises When using an induction cooking zone, the following noises can occur in the pan, depending on what it is made of and how it has been constructed. – On the higher power levels, it might buzz. This will decrease or cease altogether when the power level is reduced. -
Page 24: Pans
Induction Pans Suitable pans include: – stainless steel pans with a magnetic base – enamelled steel pans – cast iron pans Unsuitable pans: – stainless steel pans without a magnetic base – aluminium and copper pans – glass, ceramic or earthenware pots and pans To test whether a pot or pan is suitable for use on an induction cooktop, hold a magnet to the base of the pan. -
Page 25: Power Level Range
Power level range The appliance is delivered with 9 power levels programmed as standard. If you wish to fine-tune a setting, you can extend the power level range (see "Programming"). The intermediate setting will be represented by an illuminated dot next to the number. -
Page 26: Operation
Operation How the cooktop is operated The cooktop is equipped with electronic sensor controls which react to finger contact. To operate the cooktop, touch the relevant sensor. Each time you touch a sensor, an audible tone sounds. In order to set or alter a power level or the time (depending on model), the cooking zones and the timer must be "active". -
Page 27: To Switch The Cooktop On
Operation Fire hazard. Do not leave the appliance unattended whilst it is being used. To switch the cooktop on ^ Touch the s sensor. 0 will appear in each of the cooking zone displays. If no further entry is made, the cooktop will switch itself off after a few seconds for safety reasons. -
Page 28: Altering The Power Level
Operation Altering the power level ^ Touch the sensor for selecting the cooking zone you want. The power level will flash in the cooking zone display. ^ Set the power level you want by touching the relevant number on the numerical keypad. If only one of the cooking zones is in operation, you can alter the power level without activating the cooking zone. -
Page 29: Auto Heat-Up
Operation Auto heat-up When Auto heat-up has been activated, the cooking zone switches on automatically at the highest power setting and then switches to the continued cooking setting selected. The heat-up time depends on which continued cooking setting has been chosen (see chart). To activate Auto heat-up ^ Touch the sensor for selecting the cooking zone you want. - Page 30 Operation Continued Heat-up time cooking setting* in minutes and seconds (approx.) 0 : 15 0 : 15 0 : 15 0 : 15 0 : 25 0 : 25 0 : 50 0 : 50 2 : 00 5 : 50 5 : 50 2 : 50 2 : 50...
-
Page 31: Booster
Operation Booster The cooking zones are equipped with a Booster or TwinBooster (see "Guide to the appliance"). When activated, the power is boosted for a maximum of 15 minutes so that large quantities can be heated up quickly, e.g. when boiling water for cooking pasta. The Booster function can only be used on two cooking zones at the same time.. - Page 32 Operation To switch on the Booster ^ Touch the sensor for selecting the cooking zone you want. ^ Select a power level if you wish. ^ Touch the B I/II sensor. The indicator light for the booster lights up, and h starts to flash in the display.
-
Page 33: Keeping Warm Function
Operation Keeping warm function Each cooking zone has a keeping warm function "h". The "h" function is inbetween the "0" setting and the "1" setting. This function is for keeping food that has just been cooked warm, i.e. food that is still hot. It is not for reheating food that has gone cold. -
Page 34: Switching Off And Residual Heat Indicators
Operation Switching off and residual heat indicators Switching off a cooking zone ^ Touch the sensor for selecting the cooking zone you want twice. A 0 will flash in the cooking zone display for a few seconds. If the cooking zone is still hot, the residual heat indicator will then appear in the display. -
Page 35: Tips On Saving Energy
Tips on saving energy – Use a pan lid whenever possible to minimise heat loss. uncovered covered – Select a smaller pan when cooking small quantities. A smaller pan uses less energy than a larger pan with very little in it. –... -
Page 36: Timer
Timer The cooktop must be switched on to use the timer. The timer can be used for two different functions: – to set the minute minder – to set a cooking zone to switch off automatically. You can enter a time up to a maximum of 99 minutes. Minute minder To set the minute minder time Example: You want to set 15 minutes. -
Page 37: To Switch A Cooking Zone Off Automatically
Timer To switch a cooking zone off automatically You can set a time at the end of which a cooking zone will switch off automatically. All the cooking zones can be programmed at the same time. If the time programmed is longer than the maximum operational time allowed, the cooking zone will switch off after the maximum time allowed (see "Safety switch-off"). -
Page 38: To Use Both Timer Functions At The Same Time
Timer To use both timer functions at the same time The minute minder and automatic switch-off functions can be used at the same time. If you have programmed in one or more switch-off times, and would like to use the minute minder as well: Touch the m sensor repeatedly until the indicator lights for the cooking zones you have programmed light up constantly and 00 appears in the timer display. -
Page 39: Safety Features
Safety features Safety lock / System lock Keep children away from the cooktop for their own safety. Your appliance is equipped with a safety lock to prevent the cooktop and the cooking zones being switched on or any settings being altered. The safety lock is set with the cooktop switched on. - Page 40 Safety features Activating Three-finger operation (standard default setting) ^ Touch the $ sensor and the sensors for selecting both right-hand cooking zones at the same time until the safety lock indicator lights up and LC appears in the timer display. The safety lock indicator and LC will go out after a short while.
-
Page 41: Stop And Go
Safety features Stop and Go Your appliance has a Stop and Go feature which, when activated, reduces the power of all cooking zones in use to power level 1. When Stop and Go is activated, the cooking zone power levels and the setting of the timer cannot be altered and the cooktop can only be switched off. -
Page 42: Safety Switch-Off
Safety features Safety switch-off Safety switch-off with an over-long cooking time If one of the cooking zones is heated for an unusually long period of time (see chart) and the power level is not altered, the cooktop will switch itself off automatically and the relevant residual heat indicator will light up. -
Page 43: Overheating Protection
Safety features Overheating protection All the induction coils and the cooling elements for the electronics are fitted with an overheating protection mechanism. Before the induction coils or cooling elements get too hot, the overheating protection mechanism cuts in in one of the following ways: Induction coils –... -
Page 44: Cleaning And Care
Cleaning and care Danger of injury. Do not use a steam cleaning appliance to clean this appliance. The steam could reach electrical components and cause a short circuit. The appliance should be cleaned after each use. Let it cool down to room temperature before cleaning. To avoid water marks and limescale deposits, use a soft cloth to dry the appliance after cleaning. - Page 45 Wipe off all coarse soiling using a damp cloth. Stubborn soiling may need to be removed with a shielded scraper blade. Then clean the cooktop with the Original Miele ceramic and stainless steel cooktop cleaner (see "Optional accessories") applied with kitchen paper or a clean cloth. Do not apply cleaner whilst the appliance is still hot, as this could result in marking.
-
Page 46: Programming
Programming You can change the default settings of the programme options (see chart). Several settings can be altered in succession. After selecting programming mode, P (Programme) and S (Status) will appear in the timer display. On cooktops with 3 cooking zones, an additional indicator will appear at the rear left. - Page 47 Programming To save settings ^ Touch the s sensor until all the displays go out. To not save settings ^ Touch the $ sensor until all the displays go out.
- Page 48 Programming Programme* Status** Setting 00 Demonstration Demonstration mode on mode and (after the cooktop is switched on, "dE" factory default will appear in the timer display for a few settings seconds). Demonstration mode off Factory default settings reinstated 01 Stop and Go 02 Power level 9 power levels range...
- Page 49 System lock Manual activation of the system lock only Manual and automatic activation of the System lock Auto heat-up Miele|home Feature not fitted - only on Signed off communication-enabled Signed on appliances fitted with a communication module.
-
Page 50: Problem Solving Guide
With the help of the following notes, minor faults in the performance of the appliance, some of which may result from incorrect operation can be put right without contacting Miele. Please note that a call-out fee will be applied to unnecessary service visits where the problem could have been rectified as described in these operating instructions. - Page 51 Problem solving guide Problem Possible cause Remedy A smell and vapours The smell and vapours will are given off when a be less noticeable with new appliance is each subsequent use being used. before dissipating completely. The ß symbol flashes There is no pan on the Use a suitable pan (see alternately with the...
- Page 52 Problem solving guide Problem Possible cause Remedy Power level 9 is Operating both zones automatically reduced at power level 9 would if you select power exceed the permitted level 9 on two linked maximum power level cooking zones or for the two zones. extended zones at the same time.
- Page 53 Interrupt the power supply to the cooktop for approx. 1 minute. If this does not solve the problem, please call Miele. FE flashes alternately with numbers in the timer display. FE 44 The overheating See "Overheating protection".
-
Page 54: Optional Accessories
These can be ordered online at: or from Miele (see back of manual for contact details). Pans Miele offers a wide range of pans which are perfect for Miele cooktops. Please refer to the Miele website for more details on individual products. - Page 55 The cooktop sends information on its operating status via the household electrical supply. To enjoy the benefits of this feature, your appliance needs to be fitted with a communication module. Detailed information about the Miele|home system can be found at www.miele.de. XKM 2100 KM Communication module including installation accessories...
- Page 56 Miele|home a Communication enabled appliances (examples) b Communication module c SuperVision appliance d Electrical supply (Powerline) e Miele|home Gateway f WLAN) Router Possible connections (optional) g PC, Notebook h iPod* or iPhone* i Connection with a domestic bus system display j Possible internet connection * iPod und iPhone are registered trade marks of Apple Inc.
- Page 57 Optional accessories Con|ctivity a Communication module XKM 2000 DA b Communication module XKM 2100 KM c Electrical supply (Powerline)
-
Page 58: Con|Ctivity And Miele|Home
Con|ctivity and Miele|home Signing on the cooktop If you want to sign the cooktop – on to the Miele{home system, first prepare the signing on procedure on the master appliance (see the "Miele|home" fitting and installation instructions) – on to the Con|ctivity system, first sign on the rangehood (see the "Con|ctivity"... -
Page 59: Signing Off The Cooktop
Con|ctivity and Miele|home Signing off the cooktop If you want to sign off from the Miele{home system, first prepare the signing-off procedure on the master appliance (see the "Miele|home" fitting and installation instructions). ^ With the cooktop switched off, touch the s and $ sensors at the same time until the safety lock indicator light flashes. -
Page 60: Safety Instructions For Installation
Safety instructions for installation After installation, ensure that the The appliance must only be installed connection cable is without hindrance and connected to the electricity and that there is no mechanical supply by a suitably qualified and obstruction which could damage it. competent person in strict accordance with current national All dimensions in this instruction booklet... -
Page 61: Safety Distances
Safety distances Safety distance above the appliance When two or more appliances are installed together below a rangehood, e.g. a gas appliance and an electric cooktop, which have different safety distances given in the installation instructions, you should select the greater distance of the two. - Page 62 Safety distances Safety distances to the sides and back of the cooktop Ideally the cooktop should be installed with plenty of space on either side. There may be a wall at the rear or a tall unit or wall on one side (right or left). On the other side, however, no unit or divider should stand higher than the cooktop (see illustrations).
- Page 63 Safety distances Safety distances underneath the Interim shelf cooktop It is not necessary to fit an interim shelf underneath the cooktop, but one may To ensure sufficient ventilation to the cooktop, a certain gap must be left be fitted if you wish. between the underside of the cooktop Leave a gap of 10 mm at the back of and any oven, interim shelf or drawer.
-
Page 64: Cooktop With Frame Or Bevelled Edge
Cooktop with frame or bevelled edge Installation notes Tiled worktop Seal between the cooktop and the worktop Grout lines a and the hatched area underneath the cooktop frame must be smooth and even. If they are not the cooktop will not sit flush with the The sealing strip under the edge of the worktop and the sealing strip top part of the appliance provides a... -
Page 65: Building-In Dimensions
Cooktop with frame or bevelled edge Building-in dimensions KM 6322 a Front b Casing depth c Connection for Miele|home d Mains connection box The mains connection cable (1440 mm long) is supplied separately. - Page 66 Cooktop with frame or bevelled edge KM 6347 a Front b Casing depth c Connection for Miele|home d Mains connection box The mains connection cable (1440 mm long) is supplied separately.
-
Page 67: Installing The Cooktop
Cooktop with frame or bevelled edge Installing the cooktop Installing the cooktop ^ Feed the mains connection cable Preparing the worktop down through the cut-out. ^ Make the worktop cut-out according ^ Place the cooktop centrally in the to the dimensions given in the cut-out. -
Page 68: Flush-Fitted Cooktops
Flush-fitted cooktops Building-in dimensions KM 6323 a Front b Casing depth c Connection for Miele|home Please take careful note of the d Stepped cut-out for granite or marble detailed diagrams for the cut-out worktops dimensions in granite and marble e Mains connection box worktops. - Page 69 Front Please take careful note of the detailed diagrams for the cut-out b Casing depth dimensions in granite and marble c Connection for Miele|home worktops. d Stepped cut-out for granite or marble worktops e Mains connection box The mains connection cable (1440 mm...
-
Page 70: Installing The Cooktop
Flush-fitted cooktops Installing the cooktop The cooktop can be installed – in a suitable cut-out in a granite or Flush fit cooktops are only suitable marble worktop. for installation in granite, marble, tiled or solid wood worktops. – in a suitable cut-out in a tiled or solid wood worktop or a glass worktop When using a worktop made from with a wooden support frame. - Page 71 Flush-fitted cooktops Granite and marble worktops Connecting the mains cable to the appliance Preparing the worktop The mains cable must only be connected to the appliance by a qualified and competent electrician in strict accordance with current local and national safety regulations. ^ Follow the instructions in the wiring diagram (see "Electrical connection - Wiring diagram").
- Page 72 Flush-fitted cooktops Solid wood, tiled and glass Connecting the mains cable to the appliance worktops The mains cable must only be Preparing the worktop connected to the appliance by a qualified and competent electrician in strict accordance with current local and national safety regulations. ^ Follow the instructions in the wiring diagram (see "Electrical connection - Wiring diagram").
-
Page 73: Electrical Connection
When switched off there must be an type H 05 VV-F, available from all-pole contact gap of at least 3 mm in Miele. the isolator switch (including switch, fuses and relays). Ensure power is not supplied to the appliance until after installation or repair work has been carried out. -
Page 74: Wiring Diagram
Electrical connection Wiring diagram The electrical safety of this appliance can only be guaranteed when continuity is complete between it and a b c d e an effective earthing system, which complies with current local and national safety regulations. It is most important 200-240 V~ that this basic safety requirement is 200-240 V~... -
Page 75: After Sales Service, Data Plate, Warranty
In the event of any faults which you cannot remedy yourself, please contact: – Miele (see back of manual for contact details). When contacting Miele, please quote the model and serial number of your appliance. These are given on the data plate. - Page 80 KM 6322 / KM 6323 / KM 6347 / KM 6348 en - AU, NZ M.-Nr. 09 542 730 / 01...