D-Link DSL-302G User Manual page 18

Hide thumbs Also See for DSL-302G:

Table of Contents

Configure the Internet Connection (ADSL Service Connection)

All the settings necessary to establish the connection to your service provider's network and ultimately to the

Internet can be configured in the Quick Configuration menu. Make sure you know what connection type is used

for your ADSL service. Follow the steps below to establish the Internet connection:

1. Choose the Connection Type. Select PPPoA

LLC, PPPoA VC-Mux, PPPoE VC-Mux, or

PPPoE LLC, from the pull-down menu.

2. Enter the VPI and VCI values provided by your

ADSL service provider. Most users will use the

default values VPI: 8 and VCI: 35.

3. Select the type of Security Protocol used by

your ADSL service provider. This is the method

used to verify your Username and Password.

4. Type in the Username or account number used

to access the service provider's network.

5. Type in the Password for your account used to

access the service provider's network.

Save & Reboot

When you have defined the Quick Configuration settings, click the Save & Reboot button to save the settings in

temporary and reboot the system. The Modem will negotiate the ADSL connection automatically upon

rebooting. This will normally take a few seconds. When the ADSL connection has been successfully established,

the ADSL Link LED indicator will light a steady green colour. If the ADSL Link indicator does not light after a

minute or so access the web configuration manager and double check the settings.

DSL-302G ADSL Ethernet Modem User's Guide

Quick Configuration

Table of Contents