D-Link DSL-302G User Manual page 51

Hide thumbs Also See for DSL-302G:

Table of Contents

Adding to the DHCP Server Pool

Click Add, the DHCP Server Pool – Add page will be displayed, as below.

To Add DHCP server parameters define the following:

Start IP Address

End IP Address

Mac Address

NetMask

Domain Name

Gateway Address

DNS Address

SDNS Address

WINS Address

SWINS Address

Click the Submit button to save the settings in temporary memory. When you are done making changes to the

configuration settings, open the Commit & Reboot menu and click the Commit button to save your changes to

permanent memory.

DSL-302G ADSL Modem User's Guide

DHCP Server – Add Parameters

Type in the base address for the IP pool of unassigned IP addresses.

Type in the last address of the contiguous IP address range to be used by

the Modem for DHCP function.

A MAC address is the series ID unique for each device on a network. Use

this field only if you want to assign a specific IP address to the computer

that uses this MAC address. If you type a MAC address here, you must

have specified the same IP address in both the Start IP Address and End

IP Address fields.

Type in a subnet mask IP address.

Enter a domain name for the network group or leave blank.

Type in the Default Gateway IP Address that will be assigned to and used

by the DHCP clients.

Enter any Internet DNS server IP address available through the WAN

connection or use the DNS settings supplied by your service provider.

Enter a backup DNS IP address or leave blank.

Some LANs may require using WINS servers, enter the IP address of the

WINS server or leave blank.

Enter a back-up WINS server IP address or leave blank.

Table of Contents