free hit counter

D-Link DSL-302G User Manual page 68

Hide thumbs Also See for DSL-302G:
Table of Contents

Advertisement

The ATM VC add (or modify) parameters define the following :
VC Interface
VPI
VCI
Mux Type
MAX Proto per AAL5
Add or Modify PVC
1.
Choose the AAL5 set you want to define from the pull-down menu (Add menu only).
2.
Select PVC from the pull-down menu.
3.
Type in the new VPI and VCI values for a new VC Interface or changing the existing values.
4.
Select VC-Mux or LLC from pull-down menu.
5.
Type the number of MAX Proto per AAL5. The default value of VC-Mux mode is 1 and LLC is 2.
6.
Click Submit. A page displays to confirm your change.
7.
Click Close to return to the System View page.
8.
Click the Admin tab, and then click Save & Reboot in the task bar.
9.
Click Save to save your changes to permanent memory.
Add or Modify SVC
1.
Choose the AAL5 set you want to define from the pull-down menu (Add menu only).
2.
Select SVC from the pull-down menu.
3.
Select E.164 or ATM as ATM Address Type from the pull-down menu.
4.
Type the ATM Address in this column. The ATM Address's length of E.164 is equal to 15 and of ATM
is equal to 40.
5.
Click Submit. A page displays to confirm your change.
6.
Click the Admin tab, and then click Save & Reboot in the task bar.
7.
Click Save to save your changes to permanent memory.
DSL-302G ADSL Modem User's Guide
The name of the lower-level interface on which this VC operates. The low-
level interface names are pre-configured in the software and identify the
type of traffic that can be supported, such as data or voice. Internet data
services typically use an AAL5-type interface.
This setting (together with the VCI and Mux Type) identifies a unique ATM
data path for communication between the Modem and service provider.
If you are adding a new VCC Interface or changing the existing VCI value,
type in the new VCI value.
Select VC-Mux or LLC from pull-down menu.
This setting indicates the number of higher-level interfaces that the VC can
support (the higher level interfaces can be PPP, EoA, or IPoA interfaces).
The Modem supports up to eight however you must make arrangements
your service provider for this additional service.
50

Advertisement

Table of Contents
loading

Table of Contents