Image Upgrade; Alarms - D-Link DSL-302G User Manual

Hide thumbs Also See for DSL-302G:

Table of Contents

Reboot Options

Select the reboot option from the pull-down menu. The options are a described here:

Reboot

Image Upgrade

You can use the image upgrade feature to upload a new software image, or a specific part of the image, to the

memory on the ADSL/Ethernet Modem. When the filenames have been entered, click the Upload button to

commence loading the firmware file. If the upload is successful, a message informs you that is was successfully

loaded and asks you to reboot the device. Go to the Reboot menu and perform and simple reboot. If the firmware

does not load, an error message informs you to try the upload again. Check the filenames and attempt to upload

again. If the file still will not load, reboot the device and try again.

Type in the full path and file name of the firmware file to be uploaded.

Upgrade File:

Alternatively you may click the Browse button to search for the file on your

system.

The Configuration Manager can be used to view alarms that occur in the system. Alarms, also called traps, are

caused by a variety of system events, including connection attempts, resets, and configuration changes.

Although you will not typically need to view this information, it may be helpful in working with your ISP to

troubleshoot problems you encounter with the device. (Despite their name, not all alarms indicate problems in

the functioning of the system.)

To display the Alarm page, log into the Configuration Manager, click the Alarm button in the Admin folder.

DSL-302G ADSL Modem User's Guide

A simple reboot. This will put into effect any configuration changes that

have been successfully committed to flash memory.

Image (Firmware) Upgrade

Table of Contents